Separate names with a comma.
thanks I found a build in a old mopar performance book for a 62 383 343 hp (nhra factor ) that I copied ,clay smith cam 516 heads with bigger...
trying to build a old school motor for fun have a 426 and will be running a hllborn injection unit what heads would work well (with some work)...
Im going from max x-ram (440) to inline 2 fours on a stock manifold carter carbs(383) I have the max wedge throttle cable and kick down lever...
if you have a price in mind I might be a player right now im waiting on a reply from a seller with a set that's bare and port and polished
call schnieder cams here in san diego I have a big solid flat tappet with lifters wasn't that much or clay smith I just got a custom grind very good
4 bolt on 62 mw looks like correct PVC have you had them maged
Do you have pics
I originally had a set but was told they had cracks (think I was screwed but that's another story) so went with the eddy victor max heads I had a...
just seen a set owner says they were on a stock eliminator class car price was 5000.00$
has anyone heard of or purchased DALE EARNHARDT INC mopar aluminum heads before ,i came across a deal for a pair of heads for 500$ ? seems low
i have a spare 65 383 standard bore but a piston is froze in it from sitting ,I plan on recreating a build i found in a old direct connection book...
I was considering sleeves also but the cost ,it is a 69 hp block that came from a charger
the machine shop mic,ed the bores and the looked at the ridge and taper and determined it would take 30 thou more to true up the bore
hi need some input im building a 383 its been awhile since ive done one I have a 69 HP block that was told to me it was a freash 30 over bore...
I am using a MSD6 and will be using a msd 2 step box it looks like one side plugs into the rev chip slot and one is for power where would the...
I'm guessing about 550 hp on a 4.30 sure grip rear end with M/T cheeter slicks
was wondering how much torque and power my stock axels can handle I have 65 rear end in my 62 dart would like to take it to the track but don't...
1103 comes up to be a purple shaft cam but I cant find the other numbers could be a hemi grind or custom ?
