Separate names with a comma.
i ve never used one before which is better single or dual stock filter location or remote ,i have enough parts to do both?
WOW that is one intense motor
I didn't notice a oil filter I have parts for both with or with out
I have both the single line pickup and the dual swinging im leaning on using the dual pick up
looks like a moroso deep sump
would like to know the pros and cons of running a Milodon external oiling system I have the stationary pick up but have a deal for the swing arm...
could you do a 1 piece front end for a 64 330 and what would be the cost
cutting down the cam to a livable lift is a good idea I would have never thought of it first time thinking of using a roller the price is very...
I was looking at a set of max wedge but decided to much cost most likely 440 source stealth the pistons are aftermarket with valve notches I'd...
building a engine that will run e85 found a roller cam and lifters at a good price ,question is its in the 750 lift range ,ive never had a roller...
I agree I got swayed by the price I don't want to get in an area I have no understanding ,parts are in my opinion very exotic and needs a mech...
Sorry my texting was all bad spelling should I fill the block or use a external water pump to help keep it cool while idling
The heads are from a alky dragster blown and be used on a gasser fire strip use only ally also I believe they are Indiy heads solid no water passage
I have found what seems to be a good deal but I need to know can you run solid ally heads on a water block(stock factory) without having heating...
im leaning to the 440 source light weight its not to much more and its new and most likely get higher revs
the part number goes to a 426 max wedge the crank came out of an engine that was in BOB ELLIOTS 63 plymouth
I have a chance to buy a 8 bolt max wedge crank for a great price but for a few dollars more I can get a lightweight crank from 440 source and im...
wow great look im planning on doing a 64 330 straight axel gasser what stacks are you using
Im planning on building a old school fuel injected gasser what heads whould be bested suited for the use im not sure if im able to use aluminum...
more than likely ill sell this as I don't need a trophy taking up space
