Separate names with a comma.
I run a Dr.diff setup on my rear - Cass is a great guy - give him a call!
I say cut it - Instead of that universal joint - I went with the one from http://www.bergmanautocraft.com/proddetail.php?prod=5-0010 which uses...
I have 13" rotors with viper calipers on the front, 12" with cobra calipers on the rear - manual brakes are awesome, (note you need the small MC...
best for driving bilstein as they are meant for the stock and xhd spring rates, if you go with a higher spring rate (like mono leaf fiberglass...
I love it, I also paired it with a boregson box and fast ratio arms giving me a total of 1.8 turns lock to lock :) I may buy the deep dish wheel...
I installed the momo prototipo wheel on mine as I loved my momo on my AE86 so much, It may be because I have big mits so it feels right for me:...
Porterfields are the only ones I know that are more performance oriented, their disk pads are amazing as well!
I'm pretty sure it doesn't matter
stich welding the body, subframe connectors, lower rad brace, inner fender brace and torque boxes. Then sway bars then high end shocks, then the...
I have 1.12" bars and I should have gone bigger, way less body roll and I barely noticed a difference in ride comfort - don't go less than pst...
ake sure to get the flow control valve for the saginaw so its not so twitchy on the road....
looks like you just buy this so you don't need the sear or metal clip - I did not know about the metal clip until now - i may just buy that first...
http://bergmanautocraft.com/proddetail.php?prod=5-0009best option I've seen
if I had to pick one I think I'd go with ride-tech. A bit pricey though..
I run sliders with 200lbs fiberglass leaf springs (hyperco) and drop front hangers
I would ask dick at firm feel - and while you are on their site you can buy some of their goodies!
grab 73 and up drum spindles, better for bumpsteer, fits the aftermarket kits for brakes, if you think your ride is too low, drop spindles are not...
I forgot I mentioned I do have a flow control valve on the saginaw so its not so twitchy, just...
with those prices your awefully close to boregson territory, i have the boregson box with fast ratio arms and roller idler bearing kit and sector...
you can check my setup in my build thread, running mono leafs with the sliders, front drop hangers and double adjustable shocks, not sure how...
