Separate names with a comma.
Just bought the PYPES 2.5 stainless header back system w/o mufflers from Summit for 259. The ubolt clamps suck ass, so I’ll get lap bands and...
TTI, but $$$$!
Any diaphragm clutch will need to have the spring removed.
Gee, Mark Worman @ GraveYardCars is always saying AMD this or AMD that! To hear him talk, it’s like the rails, pans, cross members and such just...
I do it at a much lower cost.
I like re-doing those grilles. All polished and painted where they need to be, just perfect!
When I did my buckets, I put 1 inch foam on the bolsters, made a huge difference and also a 3/4 inch spacer under the front 2 bolts to lean the...
A 402 pan or copy of it (6quarts) with matching pick up would work just fine.
I'm getting his radiator. I do like his dual fan set up, it puts out 3000cfm, but Derale has a dual fan set up that does 4000cfm and draws up to...
Nice! Now get a shroud and your fingers will thank you.
Nice! Now finish it and burn the tires!
My uncle just picked his car up and was happier than a 3 peckered billy goat in a 2 dollar whore house!!!
Here's my uncles 70 RR. I just finished installing a new trunk pan, drop offs and shock cross member.[ATTACH] [ATTACH]
She's all sealed up![ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
It's all done except the seam sealer.[ATTACH] [ATTACH] [ATTACH]
Almost forgot that a small patch panel on the inner tub has to be made.
Finally finished! Well, I have 6 more spot welds to do, so I'll call done. Next is to weld back in the j hook brackets, spare tire bracket and...
Driver Side drop off is burned in, along with most of the finish panel. I'll start the pass side drop off tomorrow. I'm trying to save the paint...