Separate names with a comma.
64-65 heads use a different valve cover than 66-71. The 64-65 are referred to as K heads. 64 were iron and 65 aluminum but same configuration. The...
Onawa, IA Dragway and Thunder Valley in Marion, SD up and running. Heading to Marion Saturday for the stock/super stock race
68's never had scoops just the louvered fresh air. It could be raced in the Modified Production class with an added scoop but not in Super Stock....
Up to date list of 62 413/410hp nhra accepted stock pistons. Not sure on availability.[ATTACH] [ATTACH][ATTACH] [ATTACH]
2dr post, 6cyl/auto, manual brakes and steering, 15" wheels. It was painted prior to 2002 per previous owner. Very straight, rust free including...
Sent you a pm
All 65 non Super Stock Coronets were 117". The A990 cars were 116".
Is the bolt pattern 4 1/2" ?
Ken Keir makes a bolt on spring loaded bar if you have a dana 60. I have one on my 62 Savoy. Very nice piece.
Thank you. I will check it out.
Looking for a 3860s Carter carb for the 64-65 426 /365 hp street wedge. Prefer loose and rebuildable.Thanks,
Edelbrock heads[ATTACH] [ATTACH] [ATTACH] [ATTACH]
SOLD: Pair of NOS Mopar 2531110-M aluminum bare heads. Reproduction of the 65 race head. Never set-up or bolted on. Uses 66-71 valve cover....
Put an I-bolt in the firewall hole used for the spring.
Open Range. Costner/Robert Duvall.
I would say you have 3705s carbs.
They most likey are 3705s. 3861s were original to the 64 hemi and may not have been stamped either...I'm not sure.
Hard to tell from pics. Are the primary and secondaries the same diameter? 3705s have 1.686" primary and secondary bore and were 1964 only. 62/63...