Separate names with a comma.
I don’t think they are. I’d really appreciate if you’d check for me. I could really use them bud.
Yy1 you happen to have the ones from your parts car?Wanted:
Front and rear ,or ANY 67 Belvedere silver special seat medallions. They may have...
Personally, Im done with roller cams in big block mopars and chevies (for that matter). In my BBM 505s both the trick flow and eddie head motors I...
I would start with the basics and do a compression and leak down test, just to eliminate anything mechanical. You said it ran fine with no choke...
Damn great deal
What size pitman does it accept
Most pre 72 winnies are 413s triple check its prolly a boo boo 413
Pull the wire off the lower right side of the starter solenoid and ground it (the solenoid post). Thatll tell you if the nss is the issue.Be...
It will sell for over 15,000 watch and see
There isnt one tx9 mopar on the planet that i wouldnt be proud to own
Are you sure you have correct 66 or 67 rocker trim? I have not had issue with rt specialties clips on any 66/67 ive done this past year[ATTACH]...
One you speak of is prob actually the 70 coronet rt six pack black car
You can buy the tanks universal gpa hat
I cleared my inbox but if you are balking at 10k from Ritchie when its probably 8500 just in hard parts, then we should reconsider my machinist.
Hoarder! LolJk but very cool
I can put you in touch with an engine builder based out of california that can build what you are looking for, dyno it, shrink wrap it and send it...
Used tanks inc hat the gpa-6 and their tank in a 69 charger. Return and feed lines for both push loc aeroquip -6 used a fuel lab filter.