Separate names with a comma.
this style won't work with my clutch
tthis one is too big , not enough clearance with shroud i have , thanks though
i am in need of a 7 blade clutch style fan, has to be 18"-19" i don't need the clutch , just the blades but will take whatever as long as they...
anyone know the diff in shaft length so i can make sure?
this is what i have[ATTACH]
bought a new open box msd dist at a swap meet , going to install it and thought id do some research, box says its a 440 dist msd 8387, but if i...
parts store here are pretty much order basis
I'm using this in my 84 truck, installing a 440 with the passengers side outlet to be able to use my current rad..
what car did a 440 come in that had a passengers side lower water pump outlet ,have a housing but having a hard time finding a hose without an...
Ok got it figured , next question , the pickup tube itself , how tight ?? It starts to tighten about three threads down , 1/4 way left to go ,...
but all that would have to be done after the bracket
finishing my 512, milodon 8 quart pan, pickup and windage tray, pickup tube is approx 3/4 of an inch off of bottom of pan, i am thinking it should...
what seals the edge of the pan to the heads when you cut the runners off?
thanks , thats what i was looking for
summits page says these will only do up to a 4.150 stroke crank
what is that ?? couldn't find any info on 3h sealer?
oil pickup install,is there anything needed on the threads? or just dry?