Separate names with a comma.
The problem with the "kick down" adjustment when using a cable is often that there is not is not enough travel in the cable when going from idle...
I did have to drill a hole in board on the trany kickdown lever to mount the cable attaching post. This was needed to get the correct lever travel...
Here is a few pictures of the setup on my 64 Belvedere wagon with a 440.
I'm using the Edelbrock Performer carb mounted on a Performer RPM intake....
Here is a certified speedometer that I took out of a 1964 Savoy Police car that I found in a junkyard several years ago.[ATTACH]
Yes, you are correct...The 38 is the Holley R4440 carb.
I jumped the gun on this.
The Carter 4638 would be correct with the 69 Coronet 500 with the 383.
I had the box in my 1964 wagon rebuilt by them back in 2000. I went with the second level which I guess would be what they now call "modern,...
I have this one. Date 9X30 What ever that is?[ATTACH]
May 22 of what year?
I have a pump housing that has 9X30 on it and I'm trying to figure out what that date is?
Here is a pic of my 68 with the wearing the original factory "Deluxe Wheel covers"[ATTACH]
That hose is just for the center carb bowl vent. The early center carbs did not have them. The other end of that hose connected to a nipple that...
Go to Rock Auto and buy the Trico Classic Blades.http://www.rockauto.com/en/moreinfo.php?pk=76099&cc=1078826&jsn=419
Part number 3507324 is a 2.94 ring and pinion set that has a 1-3/8" pinion for the 41 case.