Separate names with a comma.
With years invested in my own restore, I couldn't imagine not reaping the benefits of my time and energy. I will drive it, enjoy it and show it. I...
Ya, let us know how it turns out.
It reads from the bottom up. This is what I found
e63 383 cid 4 barrel V8 H.P. 335hp
d21 4 speed manual
rm21 Road runner Medium price 2dr coupe...
It really depends on how complete the cars is. What's missing? Can you post a picture of the fender tag? Is the drivetrain the original? Does the...
I believe I would replace the crank and put in new bearings
I have a question, If it's ever working again, should I put down what it was originally or what it is now?
It appears to be broke again. Google Doc's suck.
I'll get out to the garage tomorrow and measure the diameter on my 70 RR and let you know.
I'd sell them all to a trusted (key word "trusted") friend for $1000.00 and give her $500.00. Then let the bitching begin. Remember these old cars...
Welcome from Virginia. That's a good looking 68. go to 440source.com and look at their stealth heads.
Oh man that sucks. Try Auto Metal Direct they stamp out new fenders and they have bumpers
Ah, it appears to be broke again.
I ordered a new set of upholstery from Summit but I had to give them the PUI part number. They are not very good at their jobs. I was able to...
I know this is a long time ago, but where did you get the brackets?
Take an ohm meter or a multimeter set to ohms, you should get 1.8 to 5 ohms of resistance.
The ballast resister when cold will show battery voltage. When it heats up and then the voltage will drop. It should drop to between 6 and 9 volts
Well the engine will run without the ballast it's there to drop the primary voltage to the distributer so the points last longer and don't burn...
If you turn on the ignition do you have voltage at the coil?
Sure, it's always interesting to see the mods that everyone is doing.