• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. Dananator

    Brake pedal goes soft and to the floor when I back up?

    That’s two of us. I spoke to a nice guy named Tony and he said he experienced a similar problem on his car. So he installed an adjustable proportioning valve. I am going to get on and try it. So it might work for you.
  2. Dananator

    Brake pedal goes soft and to the floor when I back up?

    That’s the way the car was when I got it. I checked the brakes and they took 3 360’s on the star adjuster wheel before the brakes even kissed the shoes. So I adjusted them slightly tight which greatly helped the soft pedal when I back up. No I may go over the procedure to set the brakes and...
  3. Dananator

    Brake pedal goes soft and to the floor when I back up?

    Nope big shoes in back small in front.
  4. Dananator

    Brake pedal goes soft and to the floor when I back up?

    No I checked that first thing, and I have 3 master cylinders now. My original, the one off the 73 Runner and a brand new one. They act the same.
  5. Dananator

    Brake pedal goes soft and to the floor when I back up?

    I had that problem once a long time ago so it’s something else. One suggestion is try an adjustable proportioning valve which I will try this week!
  6. Dananator

    Brake pedal goes soft and to the floor when I back up?

    I did have it checked twice, one shop verified that I had the right one. One guy Tony suggested getting an adjustable one, which might be the answer. Thanks
  7. Dananator

    Brake pedal goes soft and to the floor when I back up?

    Yes I did and one shop checked to make sure it was correct for the car, and it was.
  8. Dananator

    Brake pedal goes soft and to the floor when I back up?

    I will check it again but i had 2 brake shops check it, I will look again, thanks for the tip.
  9. Dananator

    Brake pedal goes soft and to the floor when I back up?

    I have a 67 Coronet 500 with a 426 hemi. Bought it as a unfinished project. I completed it and one thing I was advised to do was put disc brakes on the front. I found 1973 Roadrunner and used the 11 3/4" discs on my car. I used the origonal calipers (rebuilt) and rotors and masteer cylinder...
  10. Dananator

    Lets see all the cool 66-67 b-body mopar pictures.!!

    I like it! Check out mine, I found it in a barn in Bellingham Wa. It had the 426 in pieces that I rebuilt, and is standard bore.
  11. Dananator

    Brake Temperature Question

    Adjusted too tight. Back the off 3 clicks.
  12. Dananator

    Lets see all the cool 66-67 b-body mopar pictures.!!

    I have a 67 also with a. 426 Hemi, 727 by JW, and a Dana 4:10.
  13. Dananator

    67 Coronet gas tank

    Do you know where I can get a sending unit that will work on my 67 Hemi Coronet? The one in now will go to the empty E and won’t go any farther? Had it checked and it’s getting the signal pulse, but won’t go any farther. Had instrument cluster calibrated by JC Auto-restorations, they say it’s...
  14. Dananator

    26" Radiator

    If it's in good shape what do you want for it, I'm looking for one for my 67 Coronet!
  15. Dananator

    67 Coronet 500 Dana 60

    Found it in a barn while garage selling in Bellingham Wash. been sitting for 35 years. What's really nice is the block has never been bored, worst cylinder was .003 over stock others were .0015 and the block is unstamped, probably an over the counter purchase from a speed shop back in '67.
  16. Dananator

    67 Coronet 500 Dana 60

    Thanks, for your input. I have a friend with a 66 Coronet 440 car also with a hemi, unfortunately he died and the car is apart, I flipped the rearend over out a lever on the perches at zero the put an angle finder and it came out 5 degrees, like what you said, but the welds on the perches...
  17. Dananator

    67 Coronet 500 Dana 60

    I have a 67 Coronet 500, 426 hemi. The last owner sawed off the leaf spring perches. I need to find out what the factory degree angle is so I can weld the new ones on. Does anybody know what the stock factory angle should be on the Dana 60?
  18. Dananator

    Dana 60 pinion angle? Help!

    I have a 67 Coronet 500 with a Dana 60 in it, unfortunately the previous owner cut the leaf spring perches off. I want to weld new ones on and am not sure what the correct factory angle is? If you know please let me know. Thanks
Back
Top