• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. RT68440

    Front Anti Sway bar installation

    Do your lower control arms have the tabs for the end links? There are specific sway bar vs. non sway bar lower control arms.
  2. RT68440

    Red Brake Drum Paint

    I’ve searched around and the service bulletins that I have found was 8/1969 and 5/1969. Then someone commented that they saw one from 2/1968 but wasn’t able to provide proof. I searched as much as I could but wasn’t sure if any of the gurus on here knows for sure when it started...
  3. RT68440

    Red Brake Drum Paint

    Hey guys, I’ve been doing some research on cars that got the red painted brake drum faces and one thing that seems to be sporadic is when this process actually started. I have heard anything from 2/1968 to 8/1969. I’m just wondering if it would be correct for my April built 1968 Charger. Has...
  4. RT68440

    Replacing Torsion bar rear crossmember

    I put a torsion bar crossmember in my 68 Charger last year. I bought an AMD piece and once I started fitting it up I came to the conclusion that it would have needed a lot of work to fit correctly. I ended up returning it and found a nice original crossmember that dropped right in...
  5. RT68440

    11 inch non finned rear drums

    I think before I did that I would try to score a nice original set at Carlisle or the Nats. The car is a couple years away from being finished, so I have time to look for a decent set. Who knows, by then they may be reproducing them...
  6. RT68440

    11 inch non finned rear drums

    I checked out the thread and looked up that number which show 70-74 finned drums. I'll keep my eyes open at the swap meets this year for a decent used set...
  7. RT68440

    11 inch non finned rear drums

    They are 2 1/2" wide
  8. RT68440

    11 inch non finned rear drums

    I'm looking for the original round ones. I'm doing a factory resto on my '68 Charger and replacing what came on it
  9. RT68440

    11 inch non finned rear drums

    I will definitely ask them. I'm ordering their brake in a box kit for the front and rear within the next month, so I'll see what they say.
  10. RT68440

    11 inch non finned rear drums

    I may measure mine and see if there is any meat left on them to turn. If there is, I can take them to work and see if the lip can be welded. I really hate to put the finned ones on...I'd rather wait and see if I can find a decent original set if mine aren't usable...
  11. RT68440

    11 inch non finned rear drums

    Hey guys, I'd like to replace the rear drums on my '68 Charger. One of the lips on the edge of one of the drums has an area that's busted off and there's not a whole lot of meat left on them anyways. What is everyone doing when it comes to replacing the earlier style 11 inch rear drums? I don't...
  12. RT68440

    Are drum brake spindles side specific?

    Thanks, it seemed like they are the same but wasn't sure if I am overlooking something...
  13. RT68440

    Are drum brake spindles side specific?

    Hey guys, I'm cleaning up my front spindles and was wondering if the spindles themselves are interchangeable from side to side. They are for 11 inch drum brakes on a '68 Charger. Thanks!
  14. RT68440

    Sector shaft seal wear

    Hey guys, I started disassembling my steering box last night and noticed a couple of grooves in the sector shaft where the seal sits. The box never leaked and this area was dry when I started disassembly, but I'm afraid that now that Ive disturbed the area that it will leak once it goes back...
  15. RT68440

    Repro master cylinder

    No it's probably going to be a couple of years before it goes into the car...
  16. RT68440

    Repro master cylinder

    I just bought that same unit ('68 Charger, manual 4 wheel drums). I was about to buy the one from Classic Industries and came across that one on eBay. It was right around $100 shipped. Seems to be a nice piece although it'll be a while before it goes on the car I flat cleared it, blasted my...
Back
Top