Separate names with a comma.
From the parts wanted ad... tail light chrome bezels,
Most places are on back order.. These are available but not cheap.Herb's Parts: 64 PLYMOUTH TAIL LIGHT BEZELS, Lamps / Lenses / Bezels, 165-64B...
What's your opinion on them? Do they have the part numbers on them like B E and A lenses? Are they a cast resin or Acrylic injected plastic like...
Snap ring pliers with the larger tips work fine if it wasn't put on by a gorilla..
If your restoring/repainting your dash frame and your careful you can just grind the back side off, push them through then just epoxy the...
Creative that is for sure. Can I ask now that they are done and glued back together does the light still pass through them giving them that glow...
That is a neat job you did. Keep in mind the original fasteners filled the hole completely as the pin in the middle expanded the plastic and...
Nos, rebuilt or used that's about it. None reproduced that I know of... I never looked if a 66 lock would work, The exterior part is small...
Honestly first thing I thought of...
The top left ones are for Polara models that have the reverse lights in the taillight assembly... The ones with the reverse lights cut into them...
Top Aluminum trim is for 64 Polara models around the license plate with and with-out reverse lights....
Thanks but they are Plymouth ones... Dodge is totally different long and thin with "bars" molded in them...[ATTACH]
Does anyone reproduce the rubber cushions that go on the rear bumper guards for a 1964 Dodge Polara? Or have a part number as a source for Nos...
I will say your best bet is to find another set that has the wiring sealed to the housing that is why the internal socket is rusted... Every once...
Didn't the C-body also have a wood grain sticker too or was that later on...
LINK??? Thier site is not the easiest to manage and see what they have unless you have a part #.
They are maybe 64 Dodge?? The shifter delete plate is for sure as 64 Plymouth had a Plymouth insignia in the middle..
Check your parts wanted ad. I have one of the Dodge emblems Nos..
If it's solid you could also splice in a piece just in the front if your good with a welder it would never be seen...If it rotted too then look...
The oil pan that is on the 440 now is a Truck/Ramcharger/Motor home pan it will not work. If you want to use a variety of pans in the future while...
