Separate names with a comma.
Crate engine won’t be that much if any more than a complete rebuild
Not the original pressure plate, not sure about the pressure plate. And I’ll have to look for the spring
Thank you all for your advice
Before I put my car up for the winter I noticed my clutch pedal isn’t returning to fully disengaged. Why would it do this? I just had the new...
Use a punch to knock it loose and n extension magnet from harbor freight to pull it out. By the way I left my rod in for over 200miles when I used...
Ahahahahahaha at those prices I’ll take 2 of everything. Lol
Have you thought of gear vendors? Handle 2000 hp
Why not try a Gear Vendor overdrive?
360 stroke it
Sounds like your push rod is worn. Change your oil quick and clean out your oil pan. The pushrod is designed to wear before the cam gets messed...
They have the rebuild Kitt hat you can do yourself also
You can have your rebuilt or just buy a refurbished 1 from Brewers in Ohio. I'm having mine rebuilt soon
CROIL! It'll loosen it up
call comp and tell them what n how your going to use the car and they will custom grind you a cam for what you want. not really any more money...
try cleaning the pully that you didn't repace with a wire brush ive had to do this befor
Just for a cheap maybe remedy try some trany seafoam. Drive it 50 or so miles then change ur fluid again I've used in my trucks in the past and...
A lot of good suggestion on what was h as ppening snd I've had most of those happen to me when I was younger. Congrats on the solultion
really nice of you to post all of the pic
what experience have u had with the gear vendors overdrive system? no cutting, just a little electronics n new driveshafthooks right on the back...
