Separate names with a comma.
I would replace the M/C with one for manual disc. It will work fine, and then you won't need to go through that again when you go to disc. I...
Mine are Hedman headers. It was the two center tubes that hit.
What headers are you running? My headers didn't hit the stock box, but did hit the Borgeson.
:popcorn::popcorn:
I would use 2. Maybe someone who knows more will post.
They help prevent wheel hop. Put them only on the front segment.
I just put a couple washers, like you said. I used loctite. I can't understand why they keep making the boxes with the incorrect angle. They've...
I put the Borgeson box on my 64, and it was way more involved than the Firm Feel box that I put on my Dart. I had to go with the Bergman pump, and...
Couple things. Is the backing plate from an A, or B body? They are different. Seeing that pattern on your shoes makes me think that the finish is...
Don't try to adjust it. You will mess it up.
You can, but I prefer to bleed it by the pushrod. I have a Mityvac, but not happy with it.
I don't have hydroboost, but I did install the Borgeson box. I had to do a couple things for it to work properly. First, I had to use the Borgeson...
None.
ESPO! Work great. Been on my car for 20 years. Still no sag.
I think mine are Addco, or Hellwig. I did front, ànd rear. Made a huge difference.
Call firm feel. They do a great job, and can customize it to your taste. The money spent is gone.
I like the adjustable prop valve. The flex line should go to a bracket that the hard line meets. It uses a clip to keep it in place.
I would be sure to check the lower control bushings first. It is the only thing I can think of that would cause this.
First, you need to find where the issue is. Have someone push, and pull on the steering wheel while you look at the steering box coupler. People...
