Separate names with a comma.
I have been reluctant to trim either the upper or lower control arms to lighten them.
What was done to the upper and lower control arms and how much weight was lost there?
What application are those for?
When I pulled the K frame on my 65 Belvedere, it had 5 pounds of dirt and gravel packed inside. I had to use a pressure washer to get most of it out.
The undercoating on my 65 Sport Fury was incredibly thick. It was over an inch thick on the gas tank, seriously. There was easily 70+ pounds of...
It's the very front of the front frame rails, where the front bumper brackets mount.
I have been considering replacing those on my 65 Belvedere as I'll be going with fiberglass bumpers.
Not that I can tell. It is primarily a drag car that (rarely) sees street duty.
Hey Bob, I lightened my K frame also. All the holes I could reach were dimpled. Went from 43 pounds down to 34 pounds. I took 3 pounds of dirt...
The hinges on my 65 Belvedere. [ATTACH]
3100 lbs is no small feat with the later cars. That is an amazing accomplishment.
Another place that is overlooked, cut off the dust shields from shock absorbers if they have them. I took them off my shocks, saved 1/2 pound per...
With a lighter door, the hinges don't need to be so 'hefty'. On my 65 Belvedere, the door hinges went from 6.2 lbs/pair to 3.4 lbs/pair including...
FMJ What's the story on the light weight, steel bumper @ 8 pounds?
If someone was going to replace regular steel fasteners with lightweight stuff (aluminum/titanium), where you would put the lighter fasteners?...
Wait, what?
Very sorry to hear/see the bad news there. Your car just drips with BadAss Awesome-ness (look it up-there's a pic of the car in the definition)....
Probably better off leaving it blank. If you do win enough to notify the IRS, you could get in trouble for fraud. I don't think most Tech guys...
I worked over my stock K frame (65 Belvedere I). Went from 43 pounds down to 34 pounds. I dimpled as many holes as I could to increase...
I put a set of the Stealth heads on an RB engine but I negated the weight savings by adding an 8-71 Blower.......