Separate names with a comma.
Mopar are above Google.
I don't know they were on there when I got the car. But dryheat measured his 64 and got me squared up. Kudos to dryheat
At this point no drive shaft. Will be one of the last things to do.
Okay folks spring hangers I have are the wrong ones. They measure 4 inch from center hole to front of hanger. Relocation kit measurements are 3...
Sleeper don't forget to weld up your spring perches if your going to be hitting hard. Don't want them to roll up on you.
The press in one's are factory other ones aftermarket. The racing guys I know weld the stud to the plate.
Got it going to have my relocation kit drilled to move it forward. Just glad I asked before the welding started would have been pissed off trying...
OKAY folks here is the skinny I have p3630454 and 455 on the car and have 21 inches on the front side. So if I'm correct the redrill on the mounts...
Thanks for the input everyone.
That was one of my questions with the way the body lifts on these cars how does it even work. Also if your twisting the diff up like that I would...
Did you use a pin snubbed also or just depend on the shocks and springs to do the work. I have many questions about the snubber.
Thank you will hit you up later on this issue. Right now going to get everything cleaned up on the undercarriage. To get it squared is the most...
I agree I have Blake's machine shop close to me will have them do the setup and drill. One thing for sure you learn something new every day on...
This answer a lot of questions. So again I'm relocating my springs so I will have to drill them also. Which is not a big problem I'll just drill...
Nate, need to get the part number off the springs to tell you what they are. These springs were on the car when I got it. The hangers were also on...
So I'm going to assume that the front hangers have different part numbers for dodge or Plymouth. Or is it up to us to make the extra holes to set...
Well that answer a lot of questions. Now that I'm really looking at this I'm finding the rear hangers are tilted more rearward then they should...
Wheel base measurements from center hub to center hub front to rear correct?. Now after someone installs ss springs and have to install the newer...
Got mine from oreillys but they are moog parts.
What's the purpose of the extra holes in the front mounts that the springs bolt onto in the rear I have ss springs.i was thinking if you move them...
