Separate names with a comma.
I am sure that 4-door sedan and wagon front seats are identical, at least '66 and '67, that I am familiar with. Years ago, I built a one-of-none...
The way the glass attached to the regulators changed from '66 to '67. So, the glass and regulators each changed. However, if you change everything...
That would be bad with everybody's advance payments in hand!
I restored a 1964 Dodge Polara 500 convertible a few years ago. It was Anniversary Gold with gold interior, which Legendary called Olive Metallic....
Wow! They are still quoting almost a year out and are offering sales? Most companies do that when they are slow, to drum up business. Crazy.
My 67 R/T uses the same ornaments, and I have had a couple break; always the front ones because they have more pressure on them. Nobody reproduces...
Sebring convertible seats have the shoulder belts incorporated in the tops of the seat beside the head rest. Usually leather and sometimes heated,...
Classic Industries carried it as MB324. However, I do not see it in their latest catalogue. You could check their website. Another recent poster...
On my '64 Polara, there are also a couple of button clips that have to popped up out of the metal support under the package tray.
I remember being at the Mopar Nationals at Columbus, Ohio in the late 1980's, and a vendor there had a 5 gallon pail of those rosette vin rivets....
I ordered a headliner from Classic Industries for my. 1964 Dodge Polara 4-door hardtop. This was the only place that advertised one for my car. I...
I used to have a 1967 Coronet wagon. I believe that only the extruded door upper and corresponding glass was different. The non-wagon Coronet had...
Are you talking about the horn ring/button?
I am guessing that '64 Dodge 440 sedan and '63-'64 Plymouth Belvedere and Fury sedans would have same seat frames.
I have never seen these on my 1964 Polara's.
I sent a console top plate from my 1964 Polara 500 to a local company for rechroming. It came back warped like your newer piece. I took it back,...
Cars with factory bucket seats had reinforcement plates welded to the floor beside transmission tunnel for the inside bucket seat frame bolts....
Years ago, SMS in Oregon redid my '64 Polara 500 door and inside rear quarter panels. They were subcontracted by Legendary Interiors. I arranged...
I just went out and looked at the console in my 1967 R/T. It looks like the grooves between the ribs are painted flat silver, like the borders of...
You could try Dante's.
