Separate names with a comma.
Do you have a vapor line at the neck and does the fuel cap block it off when you tighten it down. Just a thought
You can always regulate pressure if it's to much. I with hemi never enough fuel.
I believe there is A member on here that doing some heavy mods on his car that could help you out. I do believe he put pop up on each side. From...
Ceramic would be great at both ends but the cost isn't worth it.
Would carbon fiber hold up?
Hillbilly look in the center of the switch it maybe adjustable which then you can set the pressure cut out to what you want. If you adjust the...
Looks like a low pressure cut out switch. Don't know the color of what goes to what but the power signal for the clutch should go through that...
Great work good info like threads like these. Always learning
Recheck fuel lines first make they only have soft bends not sharp ones. Or use a five gallon gas tank and run a hose from the carb to the five...
You are correct. But finding this on heavy haul with no problem leakage. But you can always plug the second vent then run a hose from the neck to...
Just a thought has anyone installed a vent in the filler neck and then run the line to one of the vent lines you have. On heavy haul there is a...
Bio I know what you are talking about that set up is sweet. Been thinking about it for my ride. It only makes sense like r/t says hit the switch...
I guess fuel coolers don't work.
Grander, any progress on the fuel lines. Curious to see how it turned out.
i have seen some other guys go with braided fuel line from tank to frame then have bulkhead connectors. then on the other side hardline it forward...
you must go thru the frame then up to the tank. wrap fuel line with heat wrap. just my idea of what to do
might try kramer's they have alot of stuff. good luck
what's up with the motor plate. you put extra ears on it and why if you don't mine. andy the engine bay is looking sweet as the rest of the car.
This was a awesome read answered many questions. Thank you for taking the time to do the post.
Vacuum leak cover the cars one by one and see if the idle goes higher. That or take off linkage and see what it does. Good luck would like to hear...
