Separate names with a comma.
A buddy of mine tore up his transmission because of that. Tried to warn him but he thought there was enough yoke showing and it would be fine. It...
I can see the rear end moving back a little bit especially if still running the stock rubber spring eye bushings.....lots of force going on with...
Thinking it's the best way too. This is too much work for some out of shape 70 year old lol but from what I'm seeing, I'm not that out of shape!
Slimt's way or the way I was planning?
There is supposed to be a floor brace that's not in there yet plus I see a couple of places where the pan is resting on...one being the frame tie....
The original hump material goes down about 2 1/2" past the seat belt mount. I did cut out the old mount because it actually had rust around the...
It just doesn't seem or feel like I'm going about it right lol. It sure isn't laying in place like I think it should. First time to do something...
But I'll make the best of it now. Will probably use some self taping sheet metal screws to help hold it in place while cutting.....[ATTACH]
You could get a Belvedere II as a sedan but they were usually 4 door cars but never saw any II's as a 2dr sedan...and as far as I know, the coupe...
@patrick66 Sorry, don't know of a shop to send it too but they are not that hard to work on. I've done a couple myself over the years. The only...
The small block should have the engine displacement stamped on the driver side front just below the head. Might have to clean or scrape the paint...
Oh geez....I don't mean to laugh but been there done that!! Sorry that I can't help you with it......:(
I pulled out the rear regulators on my 66 2dr sedan and separated the glass from them......no problem. Might be different on a hardtop?
Are you going to use any light weight parts on the 440 like aluminum heads, intake and so forth? I guess you already know that having a nose heavy...
Very nice 66!!! Funny thing is I also have all the documentation on my 66.....drum roll...../6 Belvedere I with factory AC, auto and rubber floor...
Oh probably 99.99% of us here know about the 440 trim package lol. Now if you have to pull the grille out of that thing, let us know how that...
Well, 3700 isn't exactly light and combine that with a small wheel house, yup, that's a double whammy. My 66 Belvedere 2dr sedan was 3370 with a...
Down side to the GTX.....weight!
EVERY time I installed headers on a stock engine with a better intake manifold and bigger carb, I actually felt the difference and on the several...
A agree with Jerry....but if you're going to keep your front end that low, headers are gonna drag on lots of stuff. The 915 heads are pretty...
