Separate names with a comma.
Denatured alcohol works great . Just be sure to flush system . Why are you taking the Wilwood master cylinder out and replacing it with a stock...
Thanks Kid , that is what I was looking for , the backing plate I have is for a set of 3 inch shoes and is deeper than a 2.5 backing plate . I am...
Ok , no 2 inch shoes in the mopar world . Looking on rock auto shows 2.5 shoes for the coronet with /6 and 426 as the same shoe . What I am asking...
I just need a measurement for the spacing on the backing plate . The ones I have did come from 1965 Dodge Monaco that came from the factory with...
OK guys do me favor , if anyone has a loose backing plate for a 10x2 or 10x2.5 rear brake . Put a straight edge across the back of the plate and...
Thanks Craig , I have a set from a Monaco I parted out years ago . It was one with a four speed and a 426 wedge . If you have a rear backing plate...
I want to put 11x3 inch drums and shoe assembly from a 65 Monaco . My Coronet has an altered wheel base and that puts a lot of the weight on the...
I read on FBBO that it was a good idea to weld a stiffing plate to the bottom of the lower control arms . There are several companys that offer...
Look on the back of the rear end braces next to the cover and clean each up until you can see the castings there will be 60 on one of them if it...
The lower control arm pin should come out by taking the nut off the front and hitting the end with a hammer , be sure to cover the threads with a...
