Separate names with a comma.
Check out the 80's hair and threads!
Assuming that they are 70-72 rotors, what are they worth? They are a bit rusty & the races should be replaced, but they are NOS.
I talked with my friend & he says that he made a mistake with his dimensions. They do measure 10 15/16" & both have RH studs.
Yes.
A friend has these. What do they fit?Thanks in advance![ATTACH][ATTACH][ATTACH][ATTACH]
A cut off piece of 1 1/4' steel electrical conduit did the trick for me.
Worked like a charm. Thanks for the tips!Now all I need is the new seal kit to come in.
The service manual shows two seals; a grease retainer at the bottom. Above that is a snap ring, a retainer and another seal. The seal(s) are...
Yeah, I know. That's what happens when I make a post with my cell phone.
Is it possible to change the shaft seal on a power steering gearbox in place? If so, any advice?
Got the brakes back together & operational. On to the next projects; the radiator is out to be flushed and pressure checked, replace te hoses,...
Just got them back. I had them leave the patina on the exterior of the master cylinder....:bananadance:[ATTACH]
Vaigra in the brake fluid?
I ups'd the parts to them last week & they got them in on Friday morning. By Monday afternoon, they were shipping them back. That's what I call...
All 5 pieces are done & were shipped out today.:thumbsup:
I may be wrong, but they look to me like Chrysler calipers from a 1970 Satellite .
Sent all 4 wheel cylinders & the master off to Minnesota on Monday...https://brakeandequipment.com/[MEDIA]
I personally don't like heat applied to my nuts.
The front wheel cylinders had barnacles growing inside & I've decided that I'm just going to send all 4 wheel cylinders and Master cylinder out to...
Got the rear wheel cylinders out, apart and cleaned up. They're salvageable.:thumbsup:
