Separate names with a comma.
Do you have the original one. Had to get mine from Tony's mopar parts. Those are not reproduced. It was in pretty bad shape but had it chromed by...
Look's like it need's a whole lot. But if you get at it may be able to make a car out of it again. Lot of guy's have started with less. :thumbsup:
Frame rails are reproduced and can be bought through AMD. They may not be as bad as you think. See you have good skill's and think you can handle...
For a quick look here it is finished. [ATTACH] [ATTACH] [ATTACH]
So all jokes aside. What you have their is rare. When getting mine my wife said you sure that should have not gone too the junk yard. 5 and half...
One more thing done. That is the way it goes. Once the body is all done and motor and all installed every thing else seems to go pretty quick....
You will be glad you put the insulation in. It is a good sound deadener also. Did not do up the back seat pan but did do the bottom. Also did my...
Think you are right. This runner had the plastic bracket on the passenger side. Just one was left on the car. I always thought that they kept dirt...
Are you putting the stainless steel covers on the rocker's. Or should I say trim. Just about put those on my runner. Then decided not to do it....
Very very funny made me laugh. :lol: Some humor is better than none. At this point in the build I need a little laughter.
Using the original one's for now. Going to clean them up and coat them with heat treat paint. Thanks for the info. Thought I remembered taking the...
Wonder if I should go ahead and put the Z bar and all the clutch linkage in before installing the exhaust pipes or the other way around. On this...
4paint1 is where got my argent paint. 4paint1.com. Have the phone number some where. But it is on line. He is working another job but is in around...
2and 1/2 inch recurve leaf springs with 5 leaf's. Gave me the lift I wanted with out using air shock's. Thought I had pic's but cant find them.
Dose the stainless one's have the same grade hardness. I like stainless but we have seen that the thread's will stretch.
Just to say I don't like to patch frame rail's together. Just my feeling. Would replace the hole thing. Did patch an outer rocker on my passenger...
Yes Dad'sbee you did some good work. Know the welding is not the hard thing. But all that grinding and drilling holes is the most work I can think...
Sorry Bad B-rad. I got my welder from East Wood. Used Argon gas type welder and bought a tig on E bay. The Mig is from East Wood. East Wood sell's...
What car are you working on. I got lucky all frame rails where good on my car. I would measure form my drop downs and wheel tub's. Measure...
