Separate names with a comma.
What do you make of this. Changed the lube in my Dana 60 out while changing the pinion seal and yoke. I wasn’t expecting this brown syrup....
Installing new seal in differential, bushing & seal in trans and new u- joints - Dana rear.When I pulled the driveshaft out the caps were...
Every once in awhile someone will post about pulling out their seats, carpet, etc and finding interesting, classical stuff and trash. What about...
Looks like my 66 Hemi Satellite 30 spline yoke has .003 wear in the bushing area and needs replacing. It’s a 1330 u-joint yoke as is the...
Not sure what to make of this - 66 Satellite 4 speed. I’ve driven the car 6 or 7 times and not found any transmission leaks (it does have oil in...
This is one sharp looking, well cared for Chrysler 300 with 440 no less. I could be tempted if I had more garage space....
I had the front parking light buckets on my 66 rechromed and part of the process involves cutting out the light sockets and wire lead since they...
Some one may have stumbled on this before for tightening up a non-critical bolt or screw that the hole for it is worn out. On one of those hex...
For all you closet Ford fans out there. Posting for a friend who normally restores early Shelby GT350s. He picked this Comet up but in the...
The turn signal switch in my Satellite has very soft detent action between positions - almost none. Self canceling does work. I noticed the...
Trying to determine why the temp gage in my 66 seems to not be working. All new harness which I carefully went through and verified all wire...
Asks the man who pulled the wire out of one of his? And yes, the boots and plug barrels were lubed with dielectric grease.Mancini has a tool...
I canceled my other ad as I found a right door trim piece for my Satellite.I still need a good restorable left rear quarter top of fender...
Still looking for the following top of fender 66 Satellite aluminum trim in good, restorable condition - no holes, tears, hard crease crimps or...
I have an AFB that uses 3-step metering rods - has the pop up covers, etc. FSM confirms it. Someone stuck 2-step rods in it so I need to...
I know they didn’t come with them originally but this motor had some petrified ones on it and as difficult as these manifolds are to...
My 66 has an open spade terminal on the ignition switch. Is that a switched power connection by any chance?I know - I should have checked it...
I’m beginning to think this Hemi may never see the road again. Last time I started it, one of those plastic fuel filters ruptured and sent gas...
Boy, this thing is so pretty I’m kind of glad my GTX is stored away for the winter so I can set this on the shelf to admire for awhile.[ATTACH]...
If anyone has a spare correct bolt and two of the conical washers for 426 Hemi exhaust manifolds they would like to sell, I will buy them. Hate...
