Separate names with a comma.
Ordered Shorty plugs Accel # 414S-4. They are about 1/16 shorter and wont do the job. NGK makes a Iridium race plug but at $55 per plug not an...
Yup lots of hacks out there. I am working on a 36 Plymouth Panel with MSD Atomic FI, been to a few Performance shops around here trying to get it...
The breather hoses should be plumbed into the hedders with a check valve for pan evacuation like a PCV. Thats if you have hedders. Pretty much a...
Probably back when Super Shops was pushing Sig Erson Cams. Just saw a Pic of Eddie and Ercie Hill. Man that guy dont age.
Another SEMA nugget from when I lived in Vegas, went every year back then.[ATTACH]
1998 Think I got it @ SEMA that year.
Thumbing through the book and they dont even list a Hydro roller for our Big Blocks. Ford and Chevy list a few.
When we were running Dirt cars in N.Nevada one call to Erson and steve Tonzi in Carson got us what we needed. Alas they are now part of PBM and...
AMC Chrysler A&B engines solid lifters, from my old Erson Catalogue. Save them for a solid lifter build. Good stuff. I have a set of Hydros from a...
Yup Sipping gas and hauling ass.
Putting them in.
Finally got everything to swap the 323s to the 276s. Thanks to Threewood and Dr Diff it should be on the road by next weekend. Dont care how quick...
You can rent a tester fro O Reillys.
Vacuum gauge swinging between 18 and 8 indicates an intake valve issue. Time to do a leak down test on all cyls not just 6.
Correct I dont see anything listed. I am doing this for a friend and he dont have $$ to convert to the later style guts and wants to keep the push...
Pondering a convertor for the 63 Belvidere. I dont see anything on Cope A&A summit ect. Lots of S/S type cars at MATS run push 727s. I know I need...
All good ideas especially the heat shrink. With the VB out and everything drained I pulled the park lock housing access plug and more fluid poured...
About a year or so ago I posted about a leak coming from the park cable housing. This was when I was helping a buddy out of state. Fast foward to...
Go to O Reillys and rent a CO sniffer easy to use and pretty accurate. Also check the breather cap for a mayo looking sludgy looking crap....
More than likely you have a 489 style case unless it was changed. The 489 use a crush collar to set pinion bearing preload. If is moving in and...
