Separate names with a comma.
You can add that center section to your existing 8 3/4 in the 65, it will fit in and work with your 65 axles no problem. $1500 is too much though.
I would back it off a half point. It isn't worth the risk of having to back down the timing or screwing around mixing gas or adding additives. In...
Everytime I watch one of these "collector car auctions" I always cringe at the thought of making those lipstick/botox beauties run and drive...
I totally agree. Just simple and effective, great bang for the buck. I know these days it's stroker this and fancy head that. For decades though...
Myself, I like the longer pistons for a street engine. 470 will still make plenty of steam.
You break something harder off in there you'll have problems. Drill and tap it.
I think it would be worth more to you than to anyone else. I know I am not going to build a stock stroke 426 in the future, the strokers work...
Did I misread or are the replacement rockers the same as what was on there when all the trouble started? No HS right?
It's probably one of the more usable factory diagrams. I'm not sure if anyone reproduces the extra lines needed, I always have just bent my own....
FSM has a nice diagram that will answer your questions. The radiator cooler is used as well as the extra cooler.
Nothing wrong with them at all. When the carbs are right you leave them alone, electronic ignition is a nice and troublefree addition. Stock, they...
10lbs at idle with 20-50 oil.
I'm betting it is though.
I would have it straightened. Call a few machine shops, it should cost much less than finding a new housing. Also have them check that the axles...
I ran a set of those Howards EDM lifters in my 472, no issues. I bought them about 10 years ago so who knows what they're like now.[ATTACH]
I would suggest the 3000 stall for that cam. Do not buy a TCI anything, I bought one once and it was total junk. My son has a Hughes in this truck...
Same performance but lighter than stock.
Yup: Hydraulic=different length pushrods. Please don't use a repro camshaft, it will give up probably 30HP compared to the 270S and give nothing...
Wow: Sounds like hack work in a couple of places. That's why I just plain won't buy a "done" car, half of them are lucky to start and stop. Good...
I've also run that Comp cams 270-S8, also very mild but it performed better than the first one listed. I think you would be happier with that one.
