Separate names with a comma.
I will be traveling from Houston, TX to Santa Fe Springs, CA (LA area) the week of April 18th. I will be pulling a 6 x 12 enclosed trailer....
I am looking for recommendations for competent and knowledgeable mechanics shops in the Las Vegas area. I am purchasing a car in Las Vegas and...
Factory intake for 440 with thermoquad. Casting number indicates '74 - '76. No cracks or repairs, threaded holes all look good. $50 and you pay...
1969 440 HP engine. Missing cam, lifters, pushrods, oil pump and drive, distributor, balancer and carb. Removed from a '69 Charger 500. Rebuilt in...
I have been sorting through some of my engine blocks and noticed a casting number that ends in 440-6 Can anyone tell me what this means? [ATTACH]
I am looking at a pair of '66 Barracuda bucket seats and am wondering if the frames are the same/interchangeable with 63, 64, 65 B bodies. I think...
Wanted new hydraulic lifters for 318 LA. Given the recent situation with lifters I would like to purchase NIB hydraulic lifters that are 3+ years...
Looking for new in the box never run hydraulic lifters for 318 LA. Need to be 3+ years old. Trying to avoid some of the current lifter issues....
I have a set of Isky lifters 3912hy that were purchased for a BB. Wondering if I can use them in a LA 318. Isky list the lifter for the LA as a...
I have the pan off as well as the timing cover. Trying to decide if I should put the pan on first or the timing cover then the pan. Opinions,...
I am looking for information on weight bias/front to back on early 60's Mopars. I have several and know that they are front end heavy. I am trying...
I am considering adding to the collection but it has been so long since I have purchased anything I am out of touch with current prices. I am...
I have searched high and low and cant come up with a torque spec for the MP windage tray for a small block. Anyone know what this is supposed to be?
Anyone using an HDK suspension on their '62? I want to purchase one with the '66 and later engine position. Just wondering if anyone has had any...
I am going to refinish my aluminum intake and have been looking for options. I prefer to keep it a cast aluminum look and don't want to use paint,...
Does this look correct for 318 rocker arm placement, or should the arms be reversed to change the position of the push rods? [ATTACH] [ATTACH]
Anyone know if the 66/67 Charger instrument cluster will bolt in to the 66/67 Coronet dash?I understand all the electrics will need to be...
@Ironbuilt Looking for transportation for running complete car. Stockbridge Mi. to Spring TX 77379.
I am aware or the "HP" stampings used on 440's. However, I never heard of the "HP" being used on other blocks. I am going to look at a 413 that...
I have a long term project that I built with my son. We started when he turned 13 and it took 4 years to complete. The engine is a 318 .030 with...
