Separate names with a comma.
I'm not a fan but like white even less. Back in late 2000 I found a 97 2500 Dodge diesel and well, the red was already dead and starting to lift...
Send him a message about this site......easy.
Glad I don't do door removal/installation much anymore lol. I was 69 when I did that road runner and used 'conventional' tools and it wasn't too...
He needs to post a demo vid now lol Hey, he's only about 11 hrs away from Gunner.....:D
Had to remove the glove box on the 69 road runner to access the passenger side upper. The box was dry as a bone and falling apart and needed...
Yup....the way to install doors is without the fenders on it.....but I hope you don't have to move the doors 1/4". If you do, that means the doors...
Well, you do it pretty much the same way only it's harder to get to the bolts and you have to be more careful. I replaced both doors on a 69 road...
Are the hinges good?
Butt welds are fairly easy to smooth out and paint or seal. Lap welds are a bit harder to seal up. Even the factory didn't do a very good job on...
Sliders? My 66 has once again became a shelf and well, don't remember it having sliders.
Saw lots of paint jobs that had the paint rubbed off.....
Had to stay after it to keep it looking nice though....
Take some lacquer thinner to a spot inside the trunk or other out of the way place and see it if cuts it.....don't think the thinner will cut the...
I'm in SE Texas and only 9 miles from Galveston Bay so I know about the humidity but it's been great here lately and only 50% today with a SE...
Have you tried to give the door a punch from the inside with the palm of your hand while having the door handle pulled? If that doesn't work, you...
A friend of mine had a Ferd pickup where the paint came of the top of the hood and cab and started rusting so he sanding it and sprayed a couple...
The first time to rattle can a big block with the orange it surprised me how well it didn't cover and took 3 coats for it to start looking good.
My first 66 Plymouth was yellow....the undercoat (primer?) was black. The car was bought new in mid 66 or so......and it surprised me the first...
I've done some sheet metal work but I'm still an amature.....it takes a lot of practice.
First car to do that to was a 67 Dart that I had in the mid 70's. It was getting rusty and the oiling helped slow it down but since the car was a...
