Separate names with a comma.
They had that in the early years. Shot a stream of oil toward an opening on the rod as it passed by.
X 10,000,000 Don't skimp on a part that can leave you walking.
If he has the lift, maybe you could hire on as a $.01/hr. "employee" and get it out for him to fix.Watch and learn along the way,and maybe bring a...
You have a P.M.
Did a 390 ford for a local guy 9 years ago and had this same discussion. Went with a re condition of the factory iron arms. Had the valve tip...
Cheap 69m.m. ebay chinese."Hong Kong Hurricane" special. Kinda got shafted. Bought them when they were $249. Last I saw they were $169. E-heads,...
Satellite 11-10-2021 - YouTube Not trying to make this a turbo post, but this is the current "build"
I think those rockers will need a cup end on the pushrod. You will want to get a checking /adjustable pushrod and measure to get the actual length...
I had the converter and the cam made for the combo. If I short shift second gear under much load, it stalls back to about 4700 r.p.m. I had a...
[ATTACH] Satellite 11-10-2021 - YouTube Sorry, I guess I'm a little late to this post. Been boosted for 11 years now. Started with an old 383,...
P.S., The Dulcich articles are among the best you will find from a magazine article. The 666 H.P. "Air Hammer" rocks. Recently brought it back for...
Just to try to add to the old post, these are the best 906 heads I have been involved with. This 72 R.R. Has since been a best of 11.08...
470 and be done with it. $.02
Did my first "stitch" repair on the inside of the lifter valley of a rebuilt, running in the car, 390 ferd. Stopped the antifreeze leakage....
Some are adjustable with a small(3/32"?) allen wrench through the hose nipple. If yours is, you can dial back the total vac. advance to eliminate...
