Search results

I am 5'10", 38" waist. There is no comparison to the factory buckets. The Pro Car seats are more comfortable to sit in for long periods, they actually hold you in place when cornering, they recline and have adjustable lumber support. We have taken a couple of road trips in the car already, one...

The roller carrier's are plastic. I have not found any replacements any where. Be very careful with them.

I used all Rustoleum products. Self etching primer first. Then flat black for a base, 2 light coats and one heavier. Then a final light coat of Rustoleum textured black. The textured black was hard to find.

I used the flat black base and last coat with the textured paint. What do you think?

They really hold you in. Seem comfortable, but I have not driven the car yet with these seats.

Drivers side bracket, passenger side is the same. I made the bracket sit lower than Procar intended them to be. I have read that the Procar seats sit too high in most cars. Also turned the bracket front to rear to get the seat further back. Also, I had to trim away some of the square tube by the...

Procar said they make the correct brackets for 71 to 74 B body. Will take 6 to 8 weeks to get them made. I called Summit, they kicked me back $45 to keep the ones I have. Cut the feet off the brackets I have, refitted them and welded them back on.

I am putting the Procar elite lumbar series 1200 seats in the car using their mounting brackets, #81342, #81343. All purchased through Summit. Those brackets are listed to fit 66 to 77 Charger. But as you can see they are not even close. I sent an email to Procar, their reply back to me says to...

I think so. Everything is made in China, but not for much longer I hope. My purchase was shipped from California, 2 day delivery.

The prices for that stuff are all over the board on Ebay. I got 2 rolls of it at different times from the same seller, different prices each time and the stuff was different too. I just hope it doesnt crumble and fall off in two years.

Has anyone tried this stuff? It is pretty cheap at 22 Sq' for $40. https://www.ebay.com/itm/Sound-Deadener-Heat-Shield-Insulation-Car-Noise-Killer-Adhesive-Mat-80-x39/183749954133?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649