Search results

I bought the kit from DMT I will just need the O ring and gasket. Thank you!

Who carries the correct O ring and the heather control valve to heater body gasket for a 1964 Plymouth Fury?

Anyone?

I just purchased a set of Remflex 6002 and torque specs are 20 ft pounds.

I’m looking for a day/night, chrome based rear view mirror in excellent condition. Post photos of what you have and price including shipping to 14020 This is for my 1964 Fury, if heads are exchangeable then I will just need the head. Thank you!

This is on my 64 and is original to the car.

Jay, thanks for your help!

I just purchased a set of door locks and an ignition lock all keyed the same. Can’t mark as found…….

Pending

I wasn’t sure of the mountain, I was a corrections officer in Huntingdon when it happened.

Bill Clark died when he crashed his privately owned P-51 into a mountain side near State College. I think it was Nittany Mountain.

The water valve is where the reduction is. The inlet on the heater box is 1”, the outlet on the heater valve is 1” but the inlet on the heater valve is 5/8”..

I am looking for a hot water control valve for a 64 Plymouth heater box to be used as a core for rebuild. Thank! Bob

Car is in storage so I can’t look at it. Hot water control valve for the heater is bad and non working and needs rebuilt. Can the valve be removed without removing the heater box. It’s a non A/C heater box and will have to be removed for rebuild once it warms up.

I will order them and a sleeve from Rock Auto….thanks!

I just called NAPA to price out drivers side inner and outer tie rod ends and the outer was about $74.00 and the inner was $91.00 plus change. That seems like a pretty high price….are they just bending me over or are prices that high?

Get well!

Thanks Ed, feel better!

I believe it’s the same at least for the front fenders.

Yes Ed there is a difference but I can’t tell you what the difference is. Thank you!