Search results

I have a used 1970+ LA engine heater hose bracket. The plastic coating is incredibly nice and it has some minor corrosion on the bracket. The condition of this bracket will be right at home in the engine compartment of a driver. $10 plus cost to mail. [

Thank you. I will calculate shipping tomorrow. Regards, Bob

This is an NOS piece. Note the lack of bolt witness marks and it appears the original factory grease is still in place. There are some minor scuffs. It is an external release hood latch that requires the drop rod. I believe this is correct for 1971-72 Satellite Sebring, Road Runner and GTX...

1971-74 E-Body too.

Thank you. I’ll look again.

Thank you.

Is there drainage in the rocker panel in front of the rear wheelhouse for 1971-74 B-Body models? I don’t see anything underneath. I was assembling the quarter window and thought it would be a good idea clean out that tight space.

1972 Road Runner hardtop with roll down rear windows is the target vehicle…a friends car.

Will this fit any 1971-74 2 door hardtop B-Body models?

I have two pieces of p/n 3464344 Dodge Charger front license plate bracket. These are for 1971-72 models but I believe they will fit 1973-74 models. These are NOS but I had to refinish them due to years of shelf wear. They have been professionally powder coated. I installed new stainless...

I have 18 NOS Speco Alarm Sirens Model No SA-4P. Specifications: 6 to 12 Volts DC 25 Watts 120dB Make your own alarm. Price is $10 plus shipping.

Herb’s shows it for 1968 only or am I missing something.

I have 1972 Ember Gold interior. I need to refresh the color of some interior plastic pieces. Is there a supplier out there that I can call to assemble what I need such as dye, prep, etc?

This is a used key ignition switch that is in good working condition. This is for a standard steering column. I believe it fits 1972-85 models. I am asking $10 plus shipping.

Do you still have the housing? If so, are the heater hose nipples 1/2” and 5/8”? Some are both 5/8”.

PM sent.

I am looking for a very nice set of 383/400/440 HP valve covers. There are no wire loom holders on the driver side. The passenger side has 3 engine harness looms and 2 spark plug wire holders on the intake side. The attached pictures show what I need. Let me know you have.

I am looking for a very nice set of 383/400/440 HP valve covers. There are no wire loom holders on the driver side. The passenger side has 3 engine harness looms and 2 spark plug wire holders on the intake side. The attached pictures show what I need. Let me know you have.

I’ve been seeing reference that it could be BB and SB but without a part number? Pre 1972 with the offset bolt hole?

Single groove crankshaft pulley with an overall diameter of 6-1/8" and overall depth of 1-3/4". The bolt pattern is non symmetrical. There is some mild pitting inside but overall a very good piece. Price is $15 plus shipping