Search results

Again

Mine

Check with Doan’s.

We had a NYS inspection done on one of our company trucks. The next day as my partner drove it to work, the front wheel came off at 65 MPH. Inspecting dealership stated "We didn't pull that wheel".

I was a 1st year helper. No one was allowed near the 1000MCM scrap. If I would have known then how uncommon it was, I would have finagaled a foot of it. I think it weighed nearly 5 lbs a foot.

Agree that is not the original chain and gears.

So which one of us is going to spring for the dual diaphragm booster first?

Those nuts are available from NAPA in various sizes.

Maybe I should put a nut on that upper stud, huh?

Hey, Kern. I'm pretty sure the brake light is coming on because of low pressure to the calipers. I think maybe this proportioning valve from Cass is not doing the job. I didn't think I would have to go to an adjustable valve to get this set-up to work. And you are right in that those calipers...

This is the booster I have, and the backing plate and linkage appear to be correct.

I am using the booster that was on the car. I believe the linkage inside the car is correct for power brakes. The bleeders in the front are at the highest point. Pressure reads the same at all four wheels.

I have a 69 GTX, A33 car which when I purchased it had 11" drums at all four wheels. The build sheet reads B31 brakes, which I think would be hevi duty manual drums, but someone has converted it to power. Braking action was poor to the point of being scary, but no "Brakes" light on the dash ever...

Got it.

You bought 1000MCM copper last week? What did that cost per foot. I only saw it used on one job, and that was 45 years ago.

It actually is pretty easy if people would remember to “steer toward trouble “.

William Conrad.

Any movie with The Rock in it.

I ask this because I had one that at first glance didn’t look as bad as this, but had a lot of flaky rust behind the baffles. I ended up drilling out the spot welds, cleaning up the rust, and welding it back together.

How about the rust under the baffles?