Search results

  1. JD Cleminshaw

    So anybody try a wideband O2 on a crossrammed Hemi yet?

    I gotta check but I think this is in the middle of the work week or am I wrong?
  2. JD Cleminshaw

    So anybody try a wideband O2 on a crossrammed Hemi yet?

    Hi Ernesto! I had to look and see when that is- I will put that on the calendar.
  3. JD Cleminshaw

    So anybody try a wideband O2 on a crossrammed Hemi yet?

    Hi Ernesto! The ‘65 went for a cruise today All good up here! Hows by you?
  4. JD Cleminshaw

    So anybody try a wideband O2 on a crossrammed Hemi yet?

    Hi Ernesto! No idea on how its running! Work has been crazy but hope to take it for a spin soon.
  5. JD Cleminshaw

    So anybody try a wideband O2 on a crossrammed Hemi yet?

    Hi Ernesto and 2 blader I also see you are running a distributor with vacuum advance- having that vacuum port will enable you to take advantage of the advance mechanism there as well.
  6. JD Cleminshaw

    So anybody try a wideband O2 on a crossrammed Hemi yet?

    Hi 2 blader I have a vacuum gage along with others hung under the dash
  7. JD Cleminshaw

    So anybody try a wideband O2 on a crossrammed Hemi yet?

    hi 2 blader The powervalve on my 4160 was also 6.5. In driving the car however in cruise my vacuum is typically 15-17 in Hg. Going up a hill would take it to 10 or maybe 8 in Hg. Ernesto in 64 Sportfury also had some similar readings with his crossram. I have been running a 9.5 and I think he...
  8. JD Cleminshaw

    So anybody try a wideband O2 on a crossrammed Hemi yet?

    Hi 2 Blader I got the Proform blocks. Also in my journey with this set up I noticed that inspite of having just a mechanical fuel pump, it was delivering more pressure than the 4160 Holleys could tolerate (and caused flooding). I strongly recommend an adjustable fuel pressure regulator if you...
  9. JD Cleminshaw

    A833 Four Speed Transmission Fluid Recommendation

    Dear 440ME Didnt mean to hijack your post! Thanks for letting me know I think I know where to check tho Thanks!
  10. JD Cleminshaw

    So anybody try a wideband O2 on a crossrammed Hemi yet?

    Hi 2 blader I bought a set of pin gages for $20 on Ebay that did the trick. What carbs are you running?
  11. JD Cleminshaw

    A833 Four Speed Transmission Fluid Recommendation

    Hi R413 No sir havent had the trans out- at least not by me. Ill try that next weekend. Is 10 psi the threshold? I mean should it hold air below 10psi ?
  12. JD Cleminshaw

    A833 Four Speed Transmission Fluid Recommendation

    Hi R413 I checked the gaskets and they look good. I can reach the vent and I can spin it freely but cant see it. Any ideas on how to check that vent?
  13. JD Cleminshaw

    A833 Four Speed Transmission Fluid Recommendation

    Hi 5.7 Tailshaft is good- no leaks at all there I originally had a speedometer cable leak at the pinion adapter- since fixed. Lube runs down from the top of the trans in the back just over the speedo pinion adapter I think theres a vent up there?
  14. JD Cleminshaw

    A833 Four Speed Transmission Fluid Recommendation

    Hi guys Im chasing a leak in my A833 I replaced my speedometer cable, also the little seal for the speedometer pinion. I then added lube to the trans to the point where my I could feel lube with my pinkie finger. Went for a ride and lost a bunch of lube - I fogged the neighborhood for...
  15. JD Cleminshaw

    So anybody try a wideband O2 on a crossrammed Hemi yet?

    Ok! In my metering blocks I have .025”restrictors for idle fuel restriction Power valve is 9.5 Ngk plugs BKR4E gapped at .050” Main jets primary side are 72 at the moment. I strongly suggest measuring your current idle fuel and air bleeds using a set of pin gages before making any changes. You...
  16. JD Cleminshaw

    SOLD Steel rims 15”

    Set of 4 dodge coronet steel rims Were on the car to make it look like A990 car Almost new- Rears are 8” wide Fronts are 7” Ivory color NW Georgia Price: $75 for all 4- local pick up
  17. JD Cleminshaw

    Speedo pinion adapter leak

    Hi Hunt2elk: Ok I put in 2 seals and it still leaks! Bad! Ordered a new pinion assy from Brewers.
  18. JD Cleminshaw

    Speedo pinion adapter leak

    Hi Hunt2Elk I will try that and report Cant hurt Im fogging for mosquitoes at this point lol
  19. JD Cleminshaw

    Speedo pinion adapter leak

    I have the same issue but I replaced the seal and it still leaks very badly Any ideas
Top