Search results

I’ve converted my manual brake 70’s Satellite to Power brakes using a Wilwood master brake cylinder (7/8” bore size), Bendix style booster with linkage and stock manual pedal. The brakes have been tested and they work excellent. The only thing is that the first 1/4 of an inch the pedal doesn’t...

Thanks, Dave but I'm looking for the parts to be replaced when doing a gear swap.

My rear end has a 3.91 in and it is making noise when letting go the gas pedal. As a will be using the car as a cruising in stead of racing it I’m going to change the gear and pinion to 3.23. I haven’t done this before and want to know which parts I need. I have replaced the axle shaft bearings...

Does anybpdy know what the spline size is? I'm looking at the Dorman coupler, part number 425-252 but they say it isn't my 70's Satellite. most of the website don't display specifications/dimensions. I've bought a few parts before which afterwards were the wrong size.

Which front sway bar will fit my 70's Satellite? according to the Hotchkis website: Part number 2255F is for 66-69 B-bodies. Part number 2254F is for 70-74 E-bodies however some website say they will also fit 70-74 Mopar B-bodies. Does anybody have experience?

I have to much play on the steering column. Most of the play is in the column to coupler. There is also play from the coupler to manual box shaft. What kind of options are there besides replacing the old coupler for a new one?

I will go aftermarket but I need 9” housing first and was wwoundering which year/model would fit without having to cut and reweld it.

Well I'm looking for a stronger rear end then the 8 3/4 to handle Hellcat power. The Dana 60 doesn't have the ratio I want and the 9" would be the next option.

For my 70's Satellite I'm looking for a Ford 9"rear end. Which rear end is plug and play? Which has the right length?

Bought new ones at PG Classics.

So i'm going use sealer all the way around the gasket. And seal the window when it is installed in the gasket. After that I'll be putting some sealer between the outside of the gasket and the frame. Then all should be fixed. I've got 4 pieces of stainless trim and two small corner pieces. Where...

Thx! I’m living in the Netherlands, Europe. With shipping and taxes these are way to expensive. looking for hood/mint pair of originals for a decent price.

I’m looking for a mint pair of C moldings for my 70’s Plymouth Satellite/RR/GTX. They have to be in mint condition.

So the seal doesn't completly lock out the water? I've found this: Driven Restorations: 1968-1970 B-Body Mopar Windshield Replacement

Thx! What dit you do to stop the leaking?

What's the best way to get the windshield installed? Does anybody have a picture to share of how the window clips need to be installed? What's the best way to install the rear window? I'm looking for ideas.

Thx! Did you bought it new?

Looks great! How are you going to control it?

I'm looking for a decent and working headlight motor for a 70's Dodge Charger.

Thx, I wasn't looking for opinions. Just want to know which brands are on the market.