Search results for query: *

Hi guys just wondering if anyone has a picture of the front window edge of a original headliner on a 68-70 charger were the spikes are without the steel cover in place thanks ahead all

Thanks just found it T3 light bronze metallic door frames but CRT means unknown int ? what does this mean

Hello all just trying to decode a fender tag on a 69 charger the number that it confusing me is the T3 as it reads paint code Y3 followed by CRT then T3 416 ****

what's with this AI crap everywhere what happen to real chargers

Fantastic molded floor mats to sit on top of your good carpet just get someone to bind the edges

Dumb question but what is the reason for the J clips when they could have just used a normal screw holes for the molding instead of makeing the larger round hole then using a j clip to compensate

funny enough i just assembled mine and same thing R/H is stiffer put grease on latches etc still the same

Just finished doing mine they were super tight i used the original plastic slides all but one as it was beyond usage .I cleaned the channel well but still tight the trick was to flood the channel with graphite powder and i mean flood it even after i got them in. Working the window up and down...

Found a project 68 not a matching number or anything special & I've always loved the 68 r/t rear and the 69 front.well the car has the front grille lights etc missing so yes i know i'm going to get hammered but i want to build a 68 with the 69 front

Hello just wondering will a 1969 Coronet grille bolt straight in to a 1968 coronet

I used a black light weight acoustic sound proofing matting similar to wet suit material with a sticky back I've used this on the roof, pillars & parcel shelf as sound travels though the truck area from exhaust to road noise what a difference it makes.Don't use dynomat heavy type insulation...

Thanks pnora seems to be a movie prop used in a few movies it comes apart to make up different configurations hence the reason i couldn't find one

Hey all just wondering if anyone has or knows what car the spinning thing is off in Dirty Mary Crazy Larry. It looks like a radiator cap of a vintage car I've been trying to find one with no luck

Are you sure you have the correct bumpers in the right place as i recall having a similar issue then finding out the bumpers were for the bonnet

Be aware of the repop stuff as the profile were it mates with the door skin can be off angle and cause dents . ask me how i know

Lets not forget the brake master cylinder is different with the lines on the outer side of the master which of course would also change the brake lines also.

Just found pictures of my car which the original owner had sent me a while back that i forgot i had and just noticed mine had the front bolt on the hood hinges with the larger washer & the 2 rears were smaller washers.

Hello all as i assemble my car which i didn't pull apart i've come up to bolting stuff up the panel beater/painter threw a few bolts in to line everything up but not in the correct places as all the bolts& nuts were pretty much thrown into one tub so it's fun and games at the moment.Anyway just...

I'm running HID globes in both my headlights and spot lights on my 4wd which are a lot stronger than LED but I'm running projectors on the headlights which directs the beam is a cut line spread but it's not a distance beam but are below the eye level of drivers which won't blind the on coming...