Search results for query: *

  1. khryslerkid

    1962 Paint colour "BUFF" query

    Hard color to find on the exterior.
  2. khryslerkid

    1962 Paint colour "BUFF" query

    That's Shell Beige.
  3. khryslerkid

    Trunk mat and cardboard liner problems...Help please! 63SF

    @Geff McCarthy At the 4:00 mark they show the trunk.
  4. khryslerkid

    Painting engine bay..single stage or 2 stage paint

    It will be fine on the door jambs also. You can still blend the outer surface paint into it as long as you use hardner in the single stage. I like the looks of the single stage on these vehicles for the fact its what was used from the factory. Clear coat looks too glossy imo. There are a few...
  5. khryslerkid

    Painting engine bay..single stage or 2 stage paint

    Black. (Just kidding) I went with single stage with hardner. When painting the rest of the car later there won't be any reaction if you use BCCC. I like the single stage for nick and chip resistance. A little softer.
  6. khryslerkid

    Paint gun questions..been a long time

    I painted a 28' V hull boat with anti barnacle Imron once. Imron with pesticides mixed in! :screwy:
  7. khryslerkid

    What Die Grinder bit to use. Need to enlarge antenna hole in fender

    When you say Greenlee I think of these knock-outs. Thing is you have to be able to get to the opposite side.
  8. khryslerkid

    What Die Grinder bit to use. Need to enlarge antenna hole in fender

    Stop by your local Lowe's and get a sanding mandrel. As mentioned above tape the area incase of a slip.
  9. khryslerkid

    Nicks Garage ,He asked us a question

    Replies on the youtube. And then this one... @Nick Panaritis , we're waiting. Thanks for mentioning us :thumbsup:
  10. khryslerkid

    WOM or not?

    WOM Having problems with the rest of the keys on your keyboard? Beautiful Car :thumbsup:
  11. khryslerkid

    I'm going to be removing my old race car MAXIMVS graphics...

    1) A good artist/paint/body person might be able to wet sand the clear coat just down to the artwork and reapply new clear coat. 2) You could have a graphics place copy the artwork and reapply them in vinyl. 3) A good airbrush artist could copy them before you have to remove them.
  12. khryslerkid

    Maguires # 7 and #26 wax results

    I always liked Maguires products. The only one I didn't like was their "Hand Polish". Has a green tint to it. It looks good when you're done with it but the oil that's in it will dry out over time and you're right back to a dull finish. I like to finish with the "Cleaner Wax". It doesn't have...
  13. khryslerkid


    They used to have a "Hand Polish", don't know if it's the same. It had a greenish tint to it. It would replenish the paint with a oil but after awhile it would dry out and the dullness would come back. Kind of like that New Finish product. You could smell the kerosene in that stuff.
  14. khryslerkid


    Mequiars makes a great product for what ever you need. I'd try the Swirl Remover or the Fine Cut if the first doesn't work. They have a Cleaner Wax but it might not be aggressive enough. Using a machine has the best results but a lot of their cleaning products can be used by hand. Dont buy the...
  15. khryslerkid


    Not here too! You can put down your pencils.
  16. khryslerkid

    Name That Grill

    Yours is gold. I went with chrome :D
  17. khryslerkid

    Rearend stripe

    Rear-end stripe... oops, wrong forum :rolleyes:
  18. khryslerkid

    Mechanical Paint Removal In Detailed Area’s

    You'll have to experiment with it. Might depend on what was used for paint previously. Repainted with an epoxy paint with hardner might not desolve as quick. Some factory, baked on paints will be a little stubborn to desolve. Just keep the saturated rag on the area longer. If lacquer thinner...
  19. khryslerkid

    Mechanical Paint Removal In Detailed Area’s

    Rag soaked in lacquer thinner. Leave it set on those areas for awhile until it starts to work.