Search results for query: *

Plasti-dip is popular because it just peels off i you want to change it.

I should have also sent you a paint warning. Mask off all rollers and on 62-65 hinges also make sure to protect the ramp area that the roller rides on. No paint or lube on that area as the rollers must roll and not slide.. Do not paint the areas of the hinges that contact the body and the...

Great weather this week. Send your door hinges in for like new operation again.

The Spring Fling was great. Sunny, warm weather. Lots of people. Leno was also there for a while on Saturday. Got to see and talk to lots of site members and past customers. Thank you for all your support and business. Leo

.406 pins are custom made for me. I use 25/64" drill bit followed by a .406 reemer. 13/32" = .406 Most hinges only need the .375 pin since the original was a .338 . 23/64" drill followed by a .375 = 3/8" reemer.

First oversize is 3/8". We don't sell parts. We do complete rebuilds.

REMEMBER--MEMBERS DISCOUNT PRICING Winter is over. Time to get those projects moving again. Get your original door hinges rebuilt now. They need to be done before any pre-paint body work so the door/body/fender gaps can be set. Thanks for all of your business. Leo

OK, no problem.

OK. They must be unmodified.

About 2 weeks after we get them. Leo

Door hinge rebuild time. Send them in for professional grade service.

Time to get those doors done. Absolutely necessary to set door gaps before paint. Can deliver to Spring Fling in Van Nuys if you get them in before April 1. Mopar to you !

Hello fellow members. Same pricing as 2022, until I get another increase from my suppliers. I am finally about caught up from the Summer. A lot of bad stuff went on in the Fall. I really appreciate all of your business Looks like this year may be almost back to...

AMD, good sheetmetal, hinges not so good. All Taiwan.

Vinyl tops allowed the manufacturer to not be as concerned with sheet metal prep. Why do you think all Superbirds had vinyl tops ? Big difference in a seam seal as opposed to a lower fender . Always metal there.

Factory didn't use body filler.

Dave Patik the original owner died last year. Mike Mancini from American Muscle Car Restorations, Instruments Specialties, bought the company and is now running the company using the same contact info as before. Performance Car Graphics PCG performancecargraphics.com Instrument Specialties...

Black vinyl dye like SEM. Then a coating of a sealer. Only if vinyl is not bubbled or cracked. Otherwise replace it.

Door hinge bolts are normally accessible from the inside by removing the kick panels.

How about a picture. It is hard to visualize your problem.