Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I see a car that is show car priced in drivers condition.
Other then fresh outside paint and new front tires nothing special. Needs a lot of stuff to come close to that value.
Insides of doors need painted, upholstery needs replaced, engine painted/compartment/radiator and who knows the actual...
Heat/friction is what causes wear. As the tread gets worn down, there is less squirm in the tread and sipes. This leads to less heat buildup in the tire. Some tires also have a dual compound tread. This means that the tire has a harder tread compound in the lower layer of the tread.
All things...
It needs to be quickly accessible not only to you but if you are injured, by someone else. It could save your life.
Like having a home invasion and your gun is locked in the safe and your ammo is somewhere else. Not much good....
La timing cover( re set the TDC location on balancer), eccentric and standard water pump if it has the serp belt setup. The waterpump is a reverse rotation on those.
Instead of wasting your money on a hope and a prayer, save your pennies and do it right.
New springs. If you can afford gas you can not afford not to do it right.
2" is too much for a coil over standard shock to do and as said before every time you would hit a large bump it could be the last for...
Edelbrock makes a lot of different carbs. Which model do you have ? Has it ever been on this manifold ? AFB-Performer series, AVS-Thunder series will work.
Thermo-Quad will not. It is a " spread-bore"type carb.
RPM Air-Gap is a fully divided plenum with a square bore. Should be an AFB type carb...
You should always check the sender for function and accuracy before you install.
If you don't, you make yourself a lot of work to remove gas and drop tank enough to remove sender.
Again. They were available when Chrysler and Dana designed the rear axle assembly for Chrysler applications.
The ball bearings were also cheaper then, so Chrysler didn't do it for money reasons....Must have been thinking long term.
If you have the standard bellhousing you are missing the stud & nut. This is the proper set up and easier to install the starter. Many times the stud is missing because some one substituted it for a bolt years ago.
The stud is actually smaller on the side that the starter mounts to. This gives...
I was given a car in trade for some mechanical work. No title. Before I spent a dime on the car I spent a lot of time on the phone and at DMV.
Turns out the car was sold many years back by a used car dealer employee out the back door. The title was never transferred. Over the years the car...