• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. PurpleBeeper

    Body/Frame Diagrams for '70 Charger

    I bought frame diagrams from Ebay
  2. PurpleBeeper

    Any experience with Cardone rebuilt power steering box?

    I’ve been running a Cardone box for about 6 yrs without a problem. Make sure there’s actually one in stock
  3. PurpleBeeper

    tfs240 and victor intake fitment

    Well, as far as I’ve ever found, only a factory intake, CH4B, or six pack intake will clear an air grabber setup. I’ve got 1/2” spacers on my carbs and the air grabber box hits the air cleaner lid (fyi), so there’s not a lot of room to play with
  4. PurpleBeeper

    Door window post support adjuster

    I just bought those anti-rattle rubber bands from Megaparts for $15’ish delivered
  5. PurpleBeeper

    Door window post support adjuster

    If I remember correctly, there's some play/adjustment in where the pin itself bolts in. Also, factory had sort of a "doubled over rubber band" jammed in the bracket hole where the pin goes as an anti-rattle device. I recently saw them reproduced somewhere for less than $10 and electrical tape...
  6. PurpleBeeper

    1968 Charger Sway Bar Dilemma

    I'm pretty sure you can weld those on without taking your car apart at all
  7. PurpleBeeper

    Edelbrock fitting

    Maybe this one? You should double check...
  8. PurpleBeeper

    Distributor cap conversion?

    Kinda…I’m no expert, but I believe there’s a HEI conversion for the distributor that uses a larger cap. People on here have done that conversion
  9. PurpleBeeper

    Isky adjustable rockers and valve lash

    I’m running Isky rocker and a hydraulic cam. Follow the adjustment order carefully and make sure you stay with cylinder #1 at TDC. I loosen the nut & put the pushrod in. Then, I twirl the pushrod with my left hand and turn the adjustment screw with my right hand back and forth until I hit the...
  10. PurpleBeeper

    Windshield price?

    Reasonable. If you’re near a city, you might find it from one of the places that comes out to your car and replaces it in-site
  11. PurpleBeeper

    Clutch Safety Switch ?

    Somebody was selling a 70 clutch switch on this site about a week ago
  12. PurpleBeeper

    PS pump filler neck loose! Weld? Solder? Duct tape??

    Hmmm…..yes, replace unless it’s a “numbers matching” car. Otherwise, I’m pretty sure it’s brazed solder/torch
  13. PurpleBeeper

    Temperature sensor removal

    Yes, use the hole where the 3/8” square hole is. You’ll probably need to heat the area with a torch and use a breaker bar adapted down to 3/8” to remove the plug. You will need a brass adapter & it’s included with many temperature gauge kits
  14. PurpleBeeper

    ‘70 Road Runner Under Hood Light ?

    When I bought my Road Runner many years ago, it had a light similar to this one under the hood, not connected to anything. That light is long gone. Now, I have this similar light socket. Is an under-hood light an option in a 70 Road Runner? Where does it get installed on an air grabber hood? How...
  15. PurpleBeeper

    transmission vibration

    Well, all 383’s will be neutral balanced & a forged crankshaft 440 with small rods (‘66-‘69) will be neutral balanced also. However, “big rod” 440’s (‘70-‘73) and cast crank 440’s (‘74-‘78) will be externally balanced
  16. PurpleBeeper

    Intake manifold height

    The CH4B is the only aftermarket intake that I know of that will fit, but these guys may be correct about other intakes (?). As far as the air cleaner - it won’t help you a with a 440 engine.
  17. PurpleBeeper

    Circa 1975 318ci 4-Barrel conversion Engine Timing Question

    Good question….surprise answer. In general, your engine will run better and more efficiently with quite a bit more initial timing advance….maybe 10-15 degrees (guess), but limit your total advance to 34-36 degrees to prevent spark knock. Since you only have a few degrees initial advance AND...
  18. PurpleBeeper

    rear axle bearing service

    Yes - your question is confusing
  19. PurpleBeeper

    Ceramic or powder coating for intake and carbs?

    That I’m not sure about
Back
Top