Search results for query: *

Well I don't know but, obviously it presses something into something else! Ignorance can be fixed with education-stupid is mainly a genetic disorder! Mike

Is this a test? Or don't you really know? Mike

It looks like the "cats ***"! Did you need to adjust the floor? Mike

My transmission jack design could be adapted for floor jack use. Mike

I built a mobile bench/stand for my snowmobile maintenance years ago and found it worked well for my cars as well. Of course, a lift makes it work as designed. Mike

Check on a spray foam insulation? I have trouble in the summer, here in MI with humidity so, I installed a one ton split system A/C. It does not get much warmer than 70* normally in my shop but does get "muggy". That minisplit system did the job! My shop is quite large so even that small system...

If you bought 2 wrenches you could use them on jamb nuts! Mike

I made my set in 1971 at college in Auto Machine class. All steel with a cone. I have individual drivers for each size and even Chevy size drivers-engine and rear case bushing in T-350s. Mike

Too bad you didn't radiant tube the floor. Minimal insulation is all that's necessary and there is no more efficient heating method. Mike

I have fractional, letter, metric, and number size drills from 0 to 80. I do use them for drilling and checking clearances. Very nice to own. No substitute for having the right tools. Mike

I love those guys! Always next day for me. Mike

A small drill chuck with a 1/4" shank would adapt those hex shafts. Mike

Remember when lights and bulbs were made in America? I go thru a lot of 4' LEDs since my conversion from fluorescents. Mike

I bought mine at a auction (installed). One friend and I disassembled it on site, manually loaded it, manually unloaded it, and reasembled it at my shop. 9,000 # Rotary. I did the entire installation. Back before I was old! Mike

The hoist column base can always be sawed out and the area and depth can be whatever you desire. Common practice in factories with heavy machinery. Mike

I chose a 12,000 mini to just dehumidify the air. The shop rarely gets warmer than 72*. The conditioned space is about 35'x68'x10' or 23,800 cu ft. The North-South building is 144' long. The East-West building is 78' long now that I added a full width lean to on the East end (not shown). I...

You might consider interior weight white steel for the ceiling finish. It really helps reflect the light. Mike

My 12,000 BTU mini split system is 220 volts. Mike

Just a simple tool to assist assembly of push lock fittings. -8 in this case. Mike

I have a set of the Miller OEM spanners but, I seldom use them at once. I too have a lathe and it is really indispensable in a good shop. I thought about a mill but, have a couple friends with them-so. Mike