Search results for query: *

That hand rail system knocked it out of the park! I'm impressed. Mike

What caliber are the heaters? Mike

I'm still following your ordeal. Again, best of luck! Mike

Well, if that bandsaw is any indication of your luck, you should kick *** in court! Mike

Why don't I see more bathrooms in these shops? Mike

I constructed a portable mezzanine for a restoration project and it really helped with storage. I used screws to ease disassembly. Not nearly as nice as a walkup but, I haven't built my dream shop yet. I have 12' ceilings. Mike

After you put more goodies in that shop you will need GPS to find your way around! Just fabulous! Mike

I built my picker (of course) 20 years ago. The first cylinder (Chinese) leaked right away so I went to a better Chinese air over hydraulic unit which has been leak free for 10 years or so. Mike

Related. I now have 2 pair of eyeglasses ground for my astigmatism in my bifocal adjustment that I use for my welding and closeup work and my computer work. They were relatively cheap and really help. Any looking up, up close is a bitch with regular eyeglasses. These were a godsend when my eye...

Start a service doing this and pay for the tool. Mike

I wish you good luck brother! As well as a Merry Christmas. Mike

I think they may have gotten irritated but, mainly dried out which I usually ignored as I have very oily skin. On rare occasion I may use some hand lotion. Mike

I recently had Safety Kleen change out my tank solvent (Safety Kleen solvent for 30 years now) and it has changed formula from what I could tell. It does seem to evaporate slower. My tank is ancient and holds 35 gallons, and I had 14 years of use on the last refill, so I paid the $$$$ and figure...

I keep my two over my transmission tear-down bench. When they drip it goes in the bucket below. I use the bench to disassemble all my greasy stuff. Mike

Where will you exhaust the booth fumes? Mike

This discussion makes my memory kick in. When I was 12, I worked part time for my dad in his garage. One of my chores was to scrape the floor in the heated shop area. It was a BEAR! Oil, grease, and mud was packed down by trucks and school buses for decades. I remember it was about 1/2 to 3/4...

Can anyone recommend a good, economical brand (I have 39 double bulb fixtures) of 4', 120-volt LEDs? I bought bulbs through Amazon, and I have replaced over a dozen in 3 years' time due to flickering. They have a small PC board inside, which I suspect is the troublemaker. In 20 years, I think I...

I like them for sheet metal and wood screws. Not so much for machine screws. Mike

You're just old and Cranky! Mike

I just pulled a number out of my ***. My point was we should have switched a long time ago. Mike