Search results for query: *

I just did this with “decent” results. I used a 1-component moisture cure polyurethane and some hardware store wood clamps. I think you could soften the vinyl VERY CAREFULLY with a heat gun (???)

Thanks. I'm leaning that way except I found the double shoulder rivets.....I just have to see if I can buy less than 10,000 at a time. If not, re-weld the end

Nope, functional restoration. I’ve considered grade 8 bolts

Aren’t replacements available?

Dude.....they must have something. THANKS!

Well, to reset them, I have access to a strong press and a guy who knows how to use it. Can I just "press" the small side of a replacement rivet to "fatten up the small end". I've never done it, so I'm all ears

I’ve got a ‘70 6-way bucket seat frame that is bent & I need to straighten. It looks like I need to remove 3 of the rivets, straighten 2 pieces and replace the rivets. Where can we buy these? THANKS!

FYI- I just bought the cardboard and “jute”. Mine has always been missing

There was ant an adjustment there. If it drives you crazy, shorten the rod snide the door 1/4”

Yep, that's it

I've got a dumb question....what is a "Rallye kit"?

Not sure. A picture would help

I'm trying to replace my driver's door latch on a 70 Road Runner convertible. I bought a used latch off of Ebay & the listing swears there is more than one design for a 69-70 driver door latch and this one is correct (one on the left). I pulled my latch out (latch on right & 2nd picture) & it...

As far as I understand, the frames are the same. I searched online and came up with a string on this site. short version - 70/71(early) B-body, A-body (years?) and E-body bucket seat frames are the same. The bucket seat tracks are 1-year for a 70 b-body. I just ordered a set of those frames...

That makes sense...and use the seat tracks to line it all up?

Pretty much your only choice to remove mold/mildew is bleach. I'm not sure exactly how concentrated the bleach needs to be (5%, 10% ?%) & watch out for your clothes and carpet so they don't get their color bleached out

I'm no expert, but are those aftermarket replacement interior door panels? Does the "peeling" seem like very thin clear plastic? Is it the rest of that chrome trim metal underneath? If yes to all 3 questions...that "might" be plastic applied to the chrome by the manufacturer to protect the...

I bought a new set of rubber tips. I think it was from Year One

I'm a little confused. There should be splines on both the window regulator (male) and inside the door handle "cylinder" (female). There is a black plastic "washer" that goes on the outside of the interior panel, under the window crank, and over the "cylinder" of the window crank handle. IF...

For Satelite/Road Runner convertibles, the front seat everything is the same as hardtops/coupes....seats, door panels, consoles...all the same. In the rear seat area, the rear seat is about 1ft. narrower (rear seat covers different than hardtop/coupe) and the rear interior panels are unique to...