Search results for query: *

You could do a body over chassis like they already do with early bodies on late model Chargers. Mike

Please rephrase your question. I reads like Greek to me. Mike

I lost a cam in my 493 and it was due to a misaligned cam tunnel. After bushing and correction of bore centerlines it works fine. Mike

The KD band first. Mike

From everything I have read over the years the general consensus is to leave as much original as possible when it comes to sheet metal replacement, especially around the door opening. Mike

I hope you are NOT driving with the linkage inoperable? That will burn up your transmission quickly! I'm not familiar with the E-brock carbs (except that they are AFB/AVS copies) but, if they're like Holley's you need the adapter for Mopar. Mike

Those dimmer switches can corrode inside. They live a rough life! I would't want someone's foot stomping on me every night! Mike

The dimmer switch does not need a ground and shouldn't have one! Mike

There is a circuit breaker in the headlamp switch. Sounds like you may have a short circuit in the lamp wiring. Mike

Those extra tall scoops have a "bad ***" look! Mike

If the oil pump drive shaft is not oriented with the slot parallel with the crank shaft centerline at TDC on #1 cylinder the cap wiring may have been rotated to correct for improper pump drive installation. All the old Motor manuals show correct orientation. Mike

I agree on the leather cover. I love mine and it covered all the rim cracks. I took my shifter "cup" from the column to my local parts store and they mixed up the right color in spray cans. I painted the column and wheel ( after epoxy patching the spoke cracks) and it turned out great for my...

I'm thinking we could help you if you told us a little bit more about your car/truck? Original color would help too. Mike

There's always the good ole 6-pak scoop. I think it's available in a tall version. Mike

I fabbed this one for my 65 Belvedere from an extra hood (had rusty/rotten reinforcement, skin was OK). Mike

I haven't finished the car yet but, I purchased a Wizard radiator/fan package for my 540. It sure is pretty though! Mike

Are you needing a side cover? Where the shifting mechanism resides. Mike

Do you have a spring hanger on upside down? Mike

My 65 Coronet. Mike