Search results for query: *

I’m in need of two big block wedge solid roller cams. Both in the [email protected] range. PM with info. Thanks, Mike

Which one is that? Big block I assume?

Appreciate it. Let me know what you got.

I’m looking for a cheap tunnel ram base for a fab project. It can be for a B or RB engine. I’ll be sawing it up. PM me here Thanks, Hemirunner

Looking for a set of stage V Hemi Conversion heads and rockers. Prefer used if available. Let me know what you got via response here or PM. Thanks Hemirunner.

Did you check with Tom at Molnar Technologies?

Got a 48 degree 4 bolt R3?

Yes

The set I have looks to be a cast replacement set with no valve reliefs and measures 4.347 for .003 piston to wall at your bore. You’ll have to keep looking.

I do understand. A +.030 over piston doesn’t (technically, shouldn’t) measure 4.350. That’s considered the nominal bore diameter. Where did you measure the skirt diameter at on the piston?

The diameter of the skirt will be based on the piston material and the piston to wall clearance intended for that material and application. If you’re at 4.350, you’ll be fine with anything made to run at that finished bore. A 2618 alloy forged will probably want .0040 to .0045 clearance. A 4032...

I think I have a set that are press pins on good 906 rods removed from a great running engine. I’ll do some looking yet this weekend

I have two sets of bare 906 castings. I’m in Peoria, IL.

What head are we talking about? Iron? Aluminum? Stock style? Raised port? Indy? Edelbrock? Performer or Victor?

i’m Looking for a set of 4.360 bore forged 440 pistons. New or used, stock stroke or stroker pistons. Let me know what you have.

It looks like a discontinued grind but the specs are out there to grind something similar.

I overlooked that, thanks.

I think your part number is missing a digit.

The one I’m currently using isn’t that bad. You are correct that the motor mount threads are 3/8”. I would think that even though that’s the case, it’s close enough to get the job done.

https://www.summitracing.com/parts/pyp-4021