Search results for query: *

First, what car, year, rallye or non-rallye dash? I've not done it, but you can get a headlight switch out (with great difficulty) using the "brail method" up there by feel, and yes, you're gouge your forearm. I would do everything I could to diagnose the switch while it's still installed if...

Found an aluminum one for $85. Saw a factory one that just sold on Ebay for $60, although most look to be about $100. You might check for a used pump (to get the pulley) on this site. You might also check a salvage yard (maybe a C-body pulley). "Maybe" 440 Source?

My 2-cents? With a "stock'ish" motor anything inexpensive that has a decent fit with 1-5/8" primary tubes...Heddman, generic Summit/etc or whatever. Just ask around here for fit, especially with power steering and/or clearance with idler arm/pitman arm. Even if you have to put a small "ding"...

what car?

If you get stuck, I've used some before where I bought some off the shelf that were the correct width, removed the blades and cut them down (length)

I've had good luck at local parts stores

You need to tell us if you've got a 10.5" or 11" clutch since the bellhousings & inspection covers are different.

I don't think it "hurts" to have the scoop offset

I'm not 100%, but I'm with Cranky on this one

"Newbie looking for help with trim" - Just say hello & then tell her you have a nice Mopar (couldn't resist) - GREAT advice above (for cars that is)

Does the "wrench" piece look like an "L" with two loops at the bottom half of the "L"? Is it attached at the very bottom of the long piece on the vent window frame? If yes, then there is a metal stud (about 4" long) that attaches at the bottom of the door (& extends inside the door) with a big...

Nailed it..... you are correct sir. I've just been working on my vent windows. 66-67 = same as convertible 68-70 & 68-70 hardtop/coupe is the same.

I don't know your answer, but those clips "look" like windshield trim clips for a 70 Roadrunner....so "maybe" search for windshield clips & see if they're the same? Maybe try searching "trim clips" at RT Specialties and see what you find?

Here's my 2-cents... 1. I would suggest you look for aftermarket wheels (17" or 18") since there aren't any 14"/15" performance tires available (at least no z-rated, soft compound tires that I'm aware of) 2. Keep the car as low as possible (turn down torsion bar adjusters & consider 1"-2"...

Hmmmm…...if you turn the driveshaft, how much before the wheels move? Have you verified that the u-joints, tailshaft bearing/seal and rear end pinion seal/bearing are in good shape? No movement when wiggled firmly side-to-side?

Yep, I've seen some aftermarket automatic shifters lined up really, really well inside the factory consoles. I've even seen a couple that were bolted to 2"x 4" wood blocks to mount them (wood hidden by console) that looked great once completely installed.

Dang Terry, I think I might have one that would work for you......BUT, I'm not sure which one. I went through this myself a few years ago. I found out (the hard way) that there are several different styles of those horn button retainers. It seems like each steering wheel has a slightly...

What kind of stock wheel do you have? Do you have a picture of what the part looks like that you need? I think I have a few extras in my garage.

SCORE! You picked up a nice ride. I would suggest that if you "might" someday put a 4-speed in it that you make sure you rebuild the motor with a crankshaft that is drilled out for the 4-speed pilot bushing. Most automatics (like a motor home) are not drilled. You can get your stock crank...

I'm not familiar with that particular headliner, but I had a friend that was a body man. He told me to take off all the interior trim & remove the board. I'm assuming this would be out the back hatch of a 66 Charger. Remove the old headliner. Lay out the new cloth & glue in place using a...