• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. 493 Mike

    Correct fan shroud for 64 Polara

    I think a 64 should have a steel shroud. My 65 has the original shroud and it is steel. Mike
  2. 493 Mike

    Transmission cooler tank ruptured into Engine coolant

    I remember when my Dad's new 1964 New Yorker did the same thing, under warranty. Thanks for the memory! Mike
  3. 493 Mike

    What interior do I have in this 65 Coronet? Can anyone help with the fender tag decode?

    I think there were 3 trim levels available in the Coronet series: 330, 440, and 500. I would think you have the 500 rear seat cushions. I can't speak to the seat but, if your interior was swapped into a bench seat interior, it was cobbled to adapt. Mike Mike
  4. 493 Mike

    Poly stroker fresh build mileage query

    Most of our members work with gallons and miles you know? Mike
  5. 493 Mike

    1965 Belvedere hood latch lever?

    Yep, that would be the one. Thanks for the photos! Mike
  6. 493 Mike

    1965 Belvedere hood latch lever?

    Could you get me a shot of the release lever at the grill area? Thanks! Mike
  7. 493 Mike

    1965 Belvedere hood latch lever?

    Would someone please send me a photo of the hood latch release lever-installed? I believe I'm experiencing a brain fart, my memory is not what it used to be! Mike
  8. 493 Mike

    Cable clamp.

    Well, I feel for you, pain is hard to live with. I hope the Docs can find and repair the nerve. I turned 74 in January so, for me, the future is promising. I hope you can say that too! Mike
  9. 493 Mike

    Cable clamp.

    Serious? Trying to save the housing? Mike
  10. 493 Mike

    Cable clamp.

    But I feel fine! Mike
  11. 493 Mike

    Cable clamp.

    727 park cable clamp. Mike
  12. 493 Mike

    Cable clamp.

    Just farting around on my lathe yesterday. Mike
  13. 493 Mike

    62 Fury Dashboard assy removal ?

    I would like to add to this thread: if you already have the front glass out, and the dash removed, Install nutserts in the fastening holes instead of the original hardware. Then use socket head cap screws with flat washers to retain the dash assy. The use of a Bondhus brand, angled "Allen"...
  14. 493 Mike

    Wiper motor replacement 65 Satellite

    It may be the pivots are froze from lack of lube. I have added zerks to both of my 65s after freeing them up. A good time to add the new seal kits, as was stated earlier. Mike
  15. 493 Mike

    Wiper motor replacement 65 Satellite

    I seem to recall the FSM says it will come out through the glove box. Do you have one? Mike
  16. 493 Mike

    62 Polara sun visor question.....

    Don't you think the 3 screws at the pivot contribute to retention? Mike
  17. 493 Mike

    What PS Pump?

    If you only need a PS pump to provide pressure, use a Saginaw pump as that is what later models came with and brackets are available to mount them. Mike
  18. 493 Mike

    63' Voltage Regulator Wire Terminal

    That is a "flag" terminal. I have no idea where one like that is available but, The insulated variety are available. You could strip off the insulation and perhaps cut the "notch" into the new terminal? Try: wire-terminals Mike
  19. 493 Mike

    Horn wiring

    Should be within the TS harness, I believe. Mike
  20. 493 Mike

    Which year K member would I choose?

    My inside pic: I should have bead rolled mine for strength but, my pal with the roller has died. So, I bought 3' of sch.40 10" pvc, ripped it lengthwise, and covered the tunnel so my upholstery guy couldn't dent the sheet metal. It will be covered with a console later. Mike
Back
Top