• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. 1967coronet

    1966 Coronet 440 side trim

    Also left qt. panel .
  2. 1967coronet

    To tint, or not to tint, that is the question

    That truck is looking great, you guys have really built a cool hot rod from the ground up. I like the old small window cabs.
  3. 1967coronet

    To tint, or not to tint, that is the question

    Just my 2 cents ... I myself never was a fan of different degrees of tint around a car, looks strange . I like tint, keeps the interior cooler but for overall look of the car/ truck, if 35% will fly that's what I would use on the whole thing. Or none at all.
  4. 1967coronet

    Front Bumper Lateral Adjustment?

    Yes, chrome will not bend with out popping.
  5. 1967coronet

    Front Bumper Lateral Adjustment?

    Put what el dubb is telling you in play, Pull it forward a little . Also what Kern suggested about the fender support rod, bring the fender in a little , bumper brackets out a little like eldubb is telling you. Do not tweak those corners on the new bumper please.
  6. 1967coronet

    what's everyone using for wax nowadays?

    I have used wizard products for a few years now. They have a decent wax/polish that will still bead water after 3 or 4 trips to wash the car. For a quick clean up they have ( mist & shine) Also the have a decent spray on for flat or matte single stage black that protects from tree sap, bird...
  7. 1967coronet

    amateur needs paint help

    Sorry, but all that needs to go back to bare steel. Could be several reasons why that area wrinkled/lifted. Just go back and follow product directions on temp and mix. Wrong reducer lol i reduced a cup one time with 330 ppg grease and wax remover **** happens, Perhaps you didn't get a good mix...
  8. 1967coronet

    Painting engine bay..single stage or 2 stage paint

    Paint the bay and jamb the car with the paint your going to use on the exterior. After washing use a good prep/ wax & grease remover. Scuff every inch, rinse it off, After it dries hit it again with air & then the grease and wax remover again. Flash time.... and tac it off Now a coat of epoxy...
  9. 1967coronet

    Chassis Engineering subframe connectors?

    I put a set on my 67, Mine were the bolt on but I did weld them in place also. There are brands that weld in and follow the floor pan. My set did help. My car had carpet & pad , seat ect so I did not want to use the complete weld in set on the pans. Yes, good company , good products, I would...
  10. 1967coronet

    69 Charger door bumper stops not touching!

    I would remove the strikers and latches. Get the sills , pillars and jambs paint ready. Don't put the weather seals on yet. Do a ruff adjust to make sure the door top to cowl and door to qt. Panel and door to rocker is decent. Do not worry about the door sitting in a bit. They will be out past...
  11. 1967coronet

    Rust Bubbles - How Big of an issue?

    Your getting pretty close to spring to stick it in a body shop. Just me but if you have to hire it done I would wait till fall. It's going to have more repair area than your thinking. Most body guys will not leave any old filler in there.
  12. 1967coronet

    Rust Bubbles - How Big of an issue?

    Lol, we did a 51 chevy that the passenger window would only roll down about 4". That door was packed and pin holed. Ended up just getting another door.
  13. 1967coronet

    70 Charger Drip Rail Delete?

    To me if your going all out with the resto mod look, tucked and or molded bumpers , complete shave, all glass trim ect. Huge wheels and rubber band tires. Lights in the wheel tubes, ground effect lighting. LS transplant ? Sure shave those rails they will stand out at that point. Nothing wrong...
  14. 1967coronet

    Hood blackout stripes paint

    Just paint the car clear and all. Do your wet sand and buff. Mask out your stripes and scuff then paint them. Heck the original cars you could feel a line. Many were decals. Don't stripe it 1st, you will not be happy.
  15. 1967coronet

    Hood blackout stripes paint

    You will loose the matte look once you clear over it. I understand the ( get rid of the line ) only way I could ever pull that off was only two coats on the stripe color over your main base. Then dump at least 4 coats of clear on , next day wet sand and buff. You can use a matte additive in...
  16. 1967coronet

    welding passenger pans

    Yep ^^^^^^, .030 and crank the heat up.
  17. 1967coronet

    How close are modern paint formulas to vintage colors ?

    Your color match will depend on the guy that mixs it. Little things like age of tints , turning on the mixers each morning ect , scale zero tared ,ect makes all the differance.
  18. 1967coronet

    ATTN body gurus. Help needed.

    If you were in the US I would suggest a cheap qt. Cut off your panel and stash the rest. I'm not aware if that section being sold as a patch panel. You can build it , making a pattern with some light gauge late model car steel would help. Salvage yard fender ect. 24ga. Find one with close to...
  19. 1967coronet

    ATTN body gurus. Help needed.

    At the place your are right now, a pair of good grinders 3" and 5" , also a 3" cut off tool. I prefer the long handle ones with the inline mount. As you go on a decent body hammer with a flat pick on one end. Heal dolly. A decent 220 mig and gas bottle. Just looking at the picture that...
Back
Top