Search results for query: *

$100 if I'm buying, $400 if I'm selling. :lol:

I just ran foil backed insulation on the floor pans following the exhaust route. Then the jute pad and carpet. Oem mat in the trunk. Car is loud, I wear hearing aids , it gets to noisey I just bump the hearing aids down a couple notchs. :drinks:

Few years back I ordered a front pair from year one , they were crap, actually had Styrofoam as the inner pad. I did not know that until the driver side started coming unglued on the back side and little white beads showed up on the carpet. Lol. I finally found a good pair of used on flea bay.

Many hobby shops sell a plastic chrome spray paint , hobby lobby ect. Mabey look on their web sight. If I recall (Testers) the brand of model car paints used to sell a chrome look paint that would or should stand up for interior use.

Laugh or not ,but turtle wax sells a chrome polish that works great for fine rust removal. Try it with a shop rag 1st. If you need a little more work, The finest grade of steel wool you can find. To add a center rear belt you need to plate the under side of the pan with the plate welded in...

The front to back outer holes near the sill on 67 is the same bucket or bench. The inner locations should have a indent in the pan like mentioned above you can see them from the bottom of the pan My 67 had had those also.

I used the 3M spray can but sprayed it into a paint cup then used a few foam brushs. Like beebest I was afraid of the mess.

I am pretty sure I have a ( tooth bracket ) set from a 66 coronet 2 dr post car. If you can get any use from them you can have them for the shipping cost. PM me if you want them.

You want cheap go to E bay

Try these guys, if they do not have it they might have some ideas of were to look. https://www.google.com/url?sa=t&source=web&rct=j&url=https://upholsterysupply.com/&ved=2ahUKEwjKzd30gtL9AhUukIkEHa6kDDAQFnoECBMQAQ&usg=AOvVaw23LNQsXbj_QSwq0aQGYCQ6

Excuse the fat finger but this area needs to be removed and then replaced with a cut down aftermarket pan. Need to get outside to good steel.

Hi Gary, the reason I brought up the arm rest length is the panels will have arm rest mount holes aprox 1/2" dia . Punched in the door panel. I was not sure if a 9" arm rest will cover the hole spread for a 13" arm rest. I think the rear panels for a convert will sit out away from the side a...

Hell it's not just car parts, I sent my top plate in 3 weeks ago to get one missing tooth replaced. Still waiting.

Just seen this post. Gary the only differeance is in the arm rest length, the 500s and R/Ts use longer arm rest than the 440 models. I think the 440 is a 9 " and the 500s are 12 or 13".

Thanks, I will run them awhile and make sure I like them. Prob redo the center inserts on the back seat to match the fronts. Console is loose just sitting in there. May have to get a couple seams on it ?

Thank you R413 , :thumbsup:

Thanks, ok I should have thought of that lol.

I just got this set and installed them in my 67. Manual slide , SAE 5/16 mount studs , swap meet find so no real info on them. Trying to ID them to locate simular upholstery pattern to do the rear seat.

Nice dash pad mike. You may have better luck finding a buyer if you post this in the interior parts for sale thread.