• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. V

    How much carb is too much carb

    holy crap. i realized that i have been wrong this entire time. my intake is a single plane. the torker is a single plane. guess i need to go find a new intake, as ive been wrong. i dont know how i did so, but i did.
  2. V

    How much carb is too much carb

    i didnt miss it, i understand that you said a single plane intake with a smaller carb. i understand that a 600 with a single plane would do well. and thats why im looking into other intakes. from what ive read though, is that this intake works decently from idle to 6000 rpm, which is why i chose...
  3. V

    How much carb is too much carb

    I will check into this. i know pcvs help, i just have a basic straight through breather on mine, i wasnt wanting to blow out gaskets and seals. ideally id like to install a second one on the driver side, but the valve covers didnt come with that and id have to special make some splash covers for...
  4. V

    How much carb is too much carb

    the gentleman i purchased this intake from ran it on his 383 in his roadrunner and he ran it for years trouble free. couldnt tell you if it was stock or not, but i figured for 50 bucks and no problems with it, seemed like a good gamble. and the carb is the carb i chose because of how versatile...
  5. V

    How much carb is too much carb

    Wow! this thread got more attention than i would have expected. Sorry for the late reply everyone, ive been rather busy dealing with work and life. anyways i will do what i can to reply to everyone, because i did leave out some more information and i will get to it. ideally the vacuum would be...
  6. V

    How much carb is too much carb

    Hello all. So like the title says, how much carb is too much carb? It got me wondering if i have too big of a carb or i got something else going on. I have a 69 sport satellite wagon. I pulled a 383/727 out of a 68 fury. It has a freshened upper end, but stock bottom end. I have an edlebrock...
  7. V

    Electrical mishap? Bad VR? Help!

    Ok, i will give that a whirl. I will also purchase a new battery. The one i have isnt that great. i will get a new one as well. i get that, i was confused as to why there would be 2 wires, since the manual gave a separate diagram for hemi motors. I will tinker with it some more. I appreciate...
  8. V

    Electrical mishap? Bad VR? Help!

    Thank you, I will make sure mine matches that. To let everyone know, after i fixed the wire in the dash, i started it again and the father in law helped me tune the carburetor, and during the whole process, the regulator did not smoke. Hopefully fixing that (which is possible it was grounding...
  9. V

    Electrical mishap? Bad VR? Help!

    Yeah, its a good clean ground. Not worried about factory correct, just want it to run. ok, i will see about doing that, thank you i am not sure. The distributor is a points distributor. The alternator, I believe is original. I purchased a regulator for a 69 plymouth. Much shouldn’t have...
  10. V

    Electrical mishap? Bad VR? Help!

    Yes sir, brand new negative cable to battery and new cable to the firewall. Should i combine the negative from the firewall to the mount of the VR?
  11. V

    Electrical mishap? Bad VR? Help!

    Hello, so long story short. I installed a 383/727 from a 68 fury into a 69 satellite wagon. I hooked everything up the best i could following wiring diagrams from mymopar. According to the diagram, i am 95% sure i got it hooked up right, aside from the diagram showing two DBL wires going from...
  12. V

    Summit racing headers on 69 b body

    The motor mounts are brand new (from summit racing as well) and the problem is that imma have to beat the pipe a good 3/4 of the length in order for it to sit in there decently without hitting the gear box. Would it be crazy to run a power steering oil cooler because these pipes are gonna hear...
  13. V

    Summit racing headers on 69 b body

    So, I purchased a set of summit racing SUM-G9041 headers for my 69 plymouth satellite wagon. I put a 383/727 in this beast and i got a steering box set into place (still needs rebuilt, but that comes later) to mock up the headers. Now I have read the reviews and know that it has to be dented a...
  14. V

    FOR SALE 68/69 Satellite/RR/GTX parting out

    Everything looks perfect to me! I will go through the steering box before use. Let me know the exact amount and i will get it to you! Thank you very much!!!!
  15. V

    FOR SALE 68/69 Satellite/RR/GTX parting out

    I appreciate it!! thank you so much!
  16. V

    FOR SALE 68/69 Satellite/RR/GTX parting out

    Awesome! thank you!!, if possible, can you please note which side is left and right on the torsion bars. Also, if possible, can you please include the pitman arm and bolts that hold the steering box to the K member and the nuts/bolts/washers for the strut bars, as mine are not there. I deeply...
  17. V

    FOR SALE 68/69 Satellite/RR/GTX parting out

    I will take it! Sold! Please PM to arrange payment.
  18. V

    FOR SALE 68/69 Satellite/RR/GTX parting out

    What would you want for the strut bars, torsion bars, and steering box?
  19. V

    FOR SALE 68/69 Satellite/RR/GTX parting out

    Hello. I am looking at for torsion bars and some strut rods for the front. Also possibly a steering gear box, power steering style. If you have those that would be awesome, plus the cost for shipping to 82901, Wyoming. Thansk!
  20. V

    Exhaust… headers…. Dumping the exhaust…

    So. Forgive me as if this as been posted before. I have. 1969 plymouth satellite wagon, and im installing a 383/727 from a 68 plymouth sport fury into this wagon. Will the headers from the sport fury fit or do i need to find new headers? Also, lots people ive spoken have mentioned that i...
Back
Top