• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. khryslerkid

    Wheel spacers

    I'm using billet aluminum.
  2. khryslerkid

    center caps or not (looking for opinions)

    These look like the 10" caps. '66-'67 were the transition years from the early 10" to the newer 9". By the way, sweet looking Dodge :thumbsup:
  3. khryslerkid

    center caps or not (looking for opinions)

    The '66-'67 caps look like these (9") In my opinion the cop wheels you have on the front don't look right for your year car. Summit has the Wheel Vintiques that look factory but only take the 9" caps.
  4. khryslerkid

    center caps or not (looking for opinions)

    How about a set of American Racing on the front and the steels on the rear? They're not that expensive.
  5. khryslerkid

    Lug nuts keep loosening

    If you have the wheel mounted with a couple of nuts how much stud is showing where there isn't a nut? Down in the hole a little, flush with the hole or out of the hole? Then run a nut on the stud without a washer and see if it bottoms out before making contact with the wheel. If it does how much...
  6. khryslerkid

    We'll measurements

    Mine is a '62. Looks like 7" width would be the next size down. The 275 tire recommendation is for a 7.5 to 9.5 wheel width. There might be a 7.5 width wheel out there but I don't know where. Maybe factory wheels? I think the 275 looks good on the 8" wide rim. The inflated tire width is around 10"
  7. khryslerkid

    We'll measurements

    You can't see it in my pictures too good. The clearance between the tire and the front portion of the leaf spring was about 1/8". Almost touching a spring clamp.
  8. khryslerkid

    We'll measurements

    This was my eye balling... 8" width 4 1/2" back spacing. Looks like all kinds of room. Mounted 275/60/15 Coopers. Too tight to the leaf springs. After using 1/4" spacers. Should have used 4 1/4" back space. It looked like the 4 1/2" back spacing was going to work before I mounted the...
  9. khryslerkid

    old school looking tires that grip

    Back in the day "twisties" were know as :fool: Guess you're never too old. BTW nice avatar :thumbsup: (Guy looks familiar)
  10. khryslerkid

    63 Savoy spare

    Be careful on what size spare you use if you have limited slip.
  11. khryslerkid

    Cragar wheels. Lesson learned

    Also it's a good thing to torque the lugs again after a drive. Always had them loosen up especially Cragar SS. They'll stay tight after that.
  12. khryslerkid

    Fix-A-Flat Product

    Maybe check FB Market Place or Craigslist. My 03 is 4WD. I didn't realize they went to AWD. That makes it crucial to have all four tires exactly the same. Even same wear condition. Mine...
  13. khryslerkid

    Fix-A-Flat Product

    Don't you have a "You Pull It" yard around there?
  14. khryslerkid

    Fix-A-Flat Product

    Make sure to tell your tire guy you used it before he breaks it down. He'll :thankyou:
  15. khryslerkid

    Wheel Vintiques Series 63 issue

    If the center hole doesn't fit over the center of the axle flange, gets stuck, then that might be your problem. If it does go on without any interference then the center of the wheel is probably bent. Send it back. Most won't take them back if they have been painted. I had a set of wheels made...
  16. khryslerkid

    Rear steel wheel center cover identification help

    You won't find a matching set of four caps with those wheels. You can find the newer wheels for the rear that uses the smaller cap like on the front. '66 on up. Or find the older wheels for the front and use the 10" caps. The rear wheels you have now might be an oddball just by a little that...
  17. khryslerkid

    Slash tire combo

    I believe a ten inch wheel would be too wide. 7 1/2" is ideal for a 215 https://www.tiresandco.ca/tire-equivalence-advice.html
  18. khryslerkid

    Cooper Cobra-radial-GT tires

    Hope they don't screw up a good thing. So many buyouts end up this way.
  19. khryslerkid

    Where to get good 1/2 20 wheel studs and lug nuts

    I had a hard time finding the right studs. I needed a 1/2 x 20 thread, .625 diameter knurl, 1/2" long knurl. I found a couple listed here and there but they weren't available. So I got the next best thing and machined them to size. Some of the studs fit tight, some went in tight but were...
Back
Top